BCM6328 uses old 2.2 HW nand controller, which isn't currently supported by
brcmnand driver.
Signed-off-by: Álvaro Fernández Rojas <nolt...@gmail.com>
---
arch/mips/dts/brcm,bcm6328.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/mips/dts/brcm,bcm6328.dtsi b/arch/mips/dts/brcm,bcm6328.dtsi
index 50beed4171..350c0e903b 100644
--- a/arch/mips/dts/brcm,bcm6328.dtsi
+++ b/arch/mips/dts/brcm,bcm6328.dtsi
@@ -124,6 +124,22 @@
status = "disabled";
};
+ nand: nand-controller@10000200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,nand-bcm6368",
+ "brcm,brcmnand-v2.2",
+ "brcm,brcmnand";
+ reg-names = "nand",
+ "nand-cache",
+ "nand-int-base";
+ reg = <0x10000200 0x180>,
+ <0x10000400 0x200>,
+ <0x100000b0 0x10>;
+
+ status = "disabled";
+ };
+
leds: led-controller@10000800 {
compatible = "brcm,bcm6328-leds";
reg = <0x10000800 0x24>;
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
