> -----Original Message-----
> From: Jagan Teki <ja...@amarulasolutions.com>
> Sent: 2019年8月14日 15:38
> To: Chuanhua Han <chuanhua....@nxp.com>
> Cc: Wolfgang Denk <w...@denx.de>; Shengzhou Liu <shengzhou....@nxp.com>;
> Ruchika Gupta <ruchika.gu...@nxp.com>; Jagan Teki <ja...@openedev.com>;
> Simon Glass <s...@chromium.org>; Prabhakar Kushwaha
> <prabhakar.kushw...@nxp.com>; U-Boot-Denx <u-boot@lists.denx.de>
> Subject: [EXT] Re: [U-Boot] [PATCH v4 2/5] dm: spi: Convert Freescale ESPI
> driver to driver model
>
> Caution: EXT Email
>
> On Fri, Jun 21, 2019 at 7:52 AM Chuanhua Han <chuanhua....@nxp.com>
> wrote:
> >
> > Modify the Freescale ESPI driver to support the driver model.
> > Also resolved the following problems:
> >
> > ===================== WARNING ====================== This board
> does
> > not use CONFIG_DM_SPI. Please update the board before v2019.04 for no
> > dm conversion and v2019.07 for partially dm converted drivers.
> > Failure to update can lead to driver/board removal See
> > doc/driver-model/MIGRATION.txt for more info.
> > ====================================================
> > ===================== WARNING ====================== This board
> does
> > not use CONFIG_DM_SPI_FLASH. Please update the board to use
> > CONFIG_SPI_FLASH before the v2019.07 release.
> > Failure to update by the deadline may result in board removal.
> > See doc/driver-model/MIGRATION.txt for more info.
> > ====================================================
> >
> > Signed-off-by: Chuanhua Han <chuanhua....@nxp.com>
> > ---
> > Changes in v4:
> > - Update copyright information.
> > - Move the fsl_espi_platdata data structure to the
> > include/dm/platform_data/.
> > - Merge the contents of the fsl_espi_priv structure into the
> > fsl_spi_slave structure.
> > - Implement the fsl_espi_set_speed function.
> > - Implement the fsl_espi_set_mode function.
> > - Implement the espi_release_bus function.
> > - Remove unwanted fsl_espi_bind functions.
> > - Implement the fsl_espi_child_pre_probe function as needed.
> > - Use #if CONFIG_IS_ENABLED(OF_CONTROL)
> && !CONFIG_IS_ENABLED(OF_PLATDATA).
> > Changes in v3:
> > - Add a cover-letter for this patch set.
> > Changes in v2:
> > - The fsl_espi driver support both OF_CONTROL and PLATDATA.
> >
> > drivers/spi/fsl_espi.c | 444 ++++++++++++++++++++--------
> > include/dm/platform_data/fsl_espi.h | 16 +
> > 2 files changed, 339 insertions(+), 121 deletions(-) create mode
> > 100644 include/dm/platform_data/fsl_espi.h
> >
> > diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index
> > 7444ae1a06..849f65f0e6 100644
> > --- a/drivers/spi/fsl_espi.c
> > +++ b/drivers/spi/fsl_espi.c
> > @@ -3,18 +3,25 @@
> > * eSPI controller driver.
> > *
> > * Copyright 2010-2011 Freescale Semiconductor, Inc.
> > + * Copyright 2019 NXP
> > * Author: Mingkai Hu (mingkai...@freescale.com)
> > + * Chuanhua Han (chuanhua....@nxp.com)
> > */
> >
> > #include <common.h>
> > -
> > #include <malloc.h>
> > #include <spi.h>
> > #include <asm/immap_85xx.h>
> > +#include <dm.h>
> > +#include <errno.h>
> > +#include <fdtdec.h>
> > +#include <dm/platform_data/fsl_espi.h>
> >
> > struct fsl_spi_slave {
> > struct spi_slave slave;
> > ccsr_espi_t *espi;
> > + u32 speed_hz;
> > + unsigned int cs;
> > unsigned int div16;
> > unsigned int pm;
> > int tx_timeout;
> > @@ -28,6 +35,9 @@ struct fsl_spi_slave { #define to_fsl_spi_slave(s)
> > container_of(s, struct fsl_spi_slave, slave)
> > #define US_PER_SECOND 1000000UL
> >
> > +/* default SCK frequency, unit: HZ */
> > +#define FSL_ESPI_DEFAULT_SCK_FREQ 10000000
> > +
> > #define ESPI_MAX_CS_NUM 4
> > #define ESPI_FIFO_WIDTH_BIT 32
> >
> > @@ -62,116 +72,32 @@ struct fsl_spi_slave {
> >
> > #define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0
> >
> > -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
> > - unsigned int max_hz, unsigned int mode)
> > -{
> > - struct fsl_spi_slave *fsl;
> > - sys_info_t sysinfo;
> > - unsigned long spibrg = 0;
> > - unsigned long spi_freq = 0;
> > - unsigned char pm = 0;
> > -
> > - if (!spi_cs_is_valid(bus, cs))
> > - return NULL;
> > -
> > - fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs);
> > - if (!fsl)
> > - return NULL;
> > -
> > - fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR);
> > - fsl->mode = mode;
> > - fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN;
> > -
> > - /* Set eSPI BRG clock source */
> > - get_sys_info(&sysinfo);
> > - spibrg = sysinfo.freq_systembus / 2;
> > - fsl->div16 = 0;
> > - if ((spibrg / max_hz) > 32) {
> > - fsl->div16 = ESPI_CSMODE_DIV16;
> > - pm = spibrg / (max_hz * 16 * 2);
> > - if (pm > 16) {
> > - pm = 16;
> > - debug("Requested speed is too low: %d Hz, %ld
> Hz "
> > - "is used.\n", max_hz, spibrg / (32 * 16));
> > - }
> > - } else
> > - pm = spibrg / (max_hz * 2);
> > - if (pm)
> > - pm--;
> > - fsl->pm = pm;
> > -
> > - if (fsl->div16)
> > - spi_freq = spibrg / ((pm + 1) * 2 * 16);
> > - else
> > - spi_freq = spibrg / ((pm + 1) * 2);
> > -
> > - /* set tx_timeout to 10 times of one espi FIFO entry go out */
> > - fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND *
> ESPI_FIFO_WIDTH_BIT
> > - * 10), spi_freq);
> > -
> > - return &fsl->slave;
> > -}
> > -
> > -void spi_free_slave(struct spi_slave *slave)
> > +void spi_cs_activate(struct spi_slave *slave)
> > {
> > struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
> > - free(fsl);
> > + ccsr_espi_t *espi = fsl->espi;
> > + unsigned int com = 0;
> > + size_t data_len = fsl->data_len;
> > + uint cs;
> > +#ifndef CONFIG_DM_SPI
> > + cs = slave->cs;
> > +#else
> > + cs = fsl->cs;
> > +#endif
>
> Preserve cs in private struct and resuse it w/o this ifdef.
What does that mean? Private data, do you mean struct spi_slave? What does w/o
mean?
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
