On Mon, Aug 19, 2019 at 09:42:09AM +0200, Lukasz Majewski wrote:
> From: Mans Rullgard <m...@mansr.com>
> 
> This change allows setting pre-defined eMMC boot partition for SPL eMMC
> booting. It is necessary in the case when one wants to boot (through falcon
> boot) from eMMC after loading SPL from other memory (like SPI-NOR).
> 
> Signed-off-by: Mans Rullgard <m...@mansr.com>
> [lukma: Edit the commit message]
> Signed-off-by: Lukasz Majewski <lu...@denx.de>


Acked-by: Andreas Dannenberg <dannenb...@ti.com>

Regards, Andreas

 
> ---
> 
> Changes in v2: None
> 
>  common/spl/Kconfig   | 6 ++++++
>  common/spl/spl_mmc.c | 4 ++++
>  2 files changed, 10 insertions(+)
> 
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index 0a3877ec28..4fe4a1359c 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -293,6 +293,12 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
>         Address on the MMC to load U-Boot from, when the MMC is being used
>         in raw mode. Units: MMC sectors (1 sector = 512 bytes).
>  
> +config SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
> +     int "Number of the eMMC boot partition to use"
> +     default 1
> +     help
> +       eMMC boot partition number to use when the eMMC in raw mode.
> +
>  config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
>       bool "MMC Raw mode: by partition"
>       help
> diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
> index 2caceb5186..a4d2e63b82 100644
> --- a/common/spl/spl_mmc.c
> +++ b/common/spl/spl_mmc.c
> @@ -334,6 +334,9 @@ int spl_mmc_load(struct spl_image_info *spl_image,
>       err = -EINVAL;
>       switch (boot_mode) {
>       case MMCSD_MODE_EMMCBOOT:
> +#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
> +             part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION;
> +#else
>               /*
>                * We need to check what the partition is configured to.
>                * 1 and 2 match up to boot0 / boot1 and 7 is user data
> @@ -343,6 +346,7 @@ int spl_mmc_load(struct spl_image_info *spl_image,
>  
>               if (part == 7)
>                       part = 0;
> +#endif
>  
>               if (CONFIG_IS_ENABLED(MMC_TINY))
>                       err = mmc_switch_part(mmc, part);
> -- 
> 2.11.0
> 
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to