The SPL SDP is configured as BOOT_DEVICE_BOARD, but for i.MX8 and
i.MX8M, the boot_device_spl is still set to BOOT_DEVICE_USB, which
may cause SDP can't work, in order to fix this issue, when booting
from USB in spl, we change its type to BOOT_DEVICE_BOARD.
Signed-off-by: Sherry Sun <sherry....@nxp.com>
Signed-off-by: Ye Li <ye...@nxp.com>
---
arch/arm/mach-imx/spl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c
index 1f230aca33..a74d222dd6 100644
--- a/arch/arm/mach-imx/spl.c
+++ b/arch/arm/mach-imx/spl.c
@@ -158,7 +158,7 @@ u32 spl_boot_device(void)
case SPI_NOR_BOOT:
return BOOT_DEVICE_SPI;
case USB_BOOT:
- return BOOT_DEVICE_USB;
+ return BOOT_DEVICE_BOARD;
default:
return BOOT_DEVICE_NONE;
}
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
