Enable USB host support on GR Peach board.

To use USB host on GR Peach, it might be necessary to solder JP3 header
onto the board first and then short it. Shorting JP3 is mandatory to let
the U5 regulator to supply VBUS to the CN3 USB port.

Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com>
Cc: Chris Brandt <chris.bra...@renesas.com>
---
V2: No change
---
 arch/arm/dts/r7s72100-gr-peach-u-boot.dts | 14 ++++++++++++++
 configs/grpeach_defconfig                 |  9 ++++++++-
 2 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/r7s72100-gr-peach-u-boot.dts 
b/arch/arm/dts/r7s72100-gr-peach-u-boot.dts
index 28247d19d7..30e35e47d6 100644
--- a/arch/arm/dts/r7s72100-gr-peach-u-boot.dts
+++ b/arch/arm/dts/r7s72100-gr-peach-u-boot.dts
@@ -37,6 +37,15 @@
                };
        };
 
+       reg_usbhs0_vbus: regulator-usbhs0-vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usbhs0_vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&port4 1 GPIO_ACTIVE_LOW>;
+       };
+
+
        rpc: rpc@0xee200000 {
                compatible = "renesas,rpc-r7s72100", "renesas,rpc";
                reg = <0x3fefa000 0x100>, <0x18000000 0x08000000>;
@@ -76,3 +85,8 @@
 &scif2_pins {
        u-boot,dm-pre-reloc;
 };
+
+&usbhs0 {
+       vbus-supply = <&reg_usbhs0_vbus>;
+       status = "okay";
+};
diff --git a/configs/grpeach_defconfig b/configs/grpeach_defconfig
index 32254b3b0e..adabfbc085 100644
--- a/configs/grpeach_defconfig
+++ b/configs/grpeach_defconfig
@@ -10,6 +10,7 @@ CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_ELF is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -30,7 +31,7 @@ CONFIG_ENV_SPI_MAX_HZ=50000000
 CONFIG_USE_ENV_SPI_MODE=y
 CONFIG_ENV_SPI_MODE=0x0
 CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_BLK=y
 CONFIG_DM_GPIO=y
 CONFIG_RZA1_GPIO=y
 CONFIG_LED=y
@@ -43,11 +44,17 @@ CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_DM_ETH=y
 CONFIG_SH_ETHER=y
 CONFIG_PINCTRL=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_SCIF_CONSOLE=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_RENESAS_RPC_SPI=y
 CONFIG_TIMER=y
 CONFIG_RENESAS_OSTM_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 # CONFIG_EFI_LOADER is not set
-- 
2.23.0.rc1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to