> Subject: [PATCH v2 2/2] imx: pcl063: add nand boot support > > Booting from NAND needs nandbcb and nand boot device selection > > Signed-off-by: Parthiban Nallathambi <p...@denx.de> > --- > > Notes: > Changes in v2: > - None > > board/phytec/pcl063/spl.c | 3 +++ > configs/phycore_pcl063_defconfig | 1 + > 2 files changed, 4 insertions(+) > > diff --git a/board/phytec/pcl063/spl.c b/board/phytec/pcl063/spl.c index > 6d4c827918..358156bfbc 100644 > --- a/board/phytec/pcl063/spl.c > +++ b/board/phytec/pcl063/spl.c > @@ -197,6 +197,9 @@ void board_boot_order(u32 *spl_boot_list) > case IMX6_BMODE_EMMC: > boot_dev = BOOT_DEVICE_MMC2; > break; > + case IMX6_BMODE_NAND_MIN ... IMX6_BMODE_NAND_MAX: > + boot_dev = BOOT_DEVICE_NAND; > + break; > default: > /* Default - BOOT_DEVICE_MMC1 */ > printf("Wrong board boot order\n"); > diff --git a/configs/phycore_pcl063_defconfig > b/configs/phycore_pcl063_defconfig > index cf43b43924..c55670a8ff 100644 > --- a/configs/phycore_pcl063_defconfig > +++ b/configs/phycore_pcl063_defconfig > @@ -27,6 +27,7 @@ CONFIG_CMD_MTD=y > CONFIG_CMD_USB=y > CONFIG_CMD_USB_SDP=y > CONFIG_CMD_CACHE=y > +CONFIG_CMD_NANDBCB=y > CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" > CONFIG_MTDPARTS_DEFAULT="gpmi-nand:4m(uboot),1m(env),-(root)" > CONFIG_CMD_UBI=y
Reviewed-by: Peng Fan <peng....@nxp.com> > -- > 2.21.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot