> Subject: [PATCH 2/3] imx: initialize fec only when enabled > > board early initialize fec ethernet controller pinmux only when FEC is enabled > > Signed-off-by: Parthiban Nallathambi <p...@denx.de> > --- > board/phytec/pcl063/pcl063.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/board/phytec/pcl063/pcl063.c b/board/phytec/pcl063/pcl063.c > index f8cbd1c11e..96dd9e38f3 100644 > --- a/board/phytec/pcl063/pcl063.c > +++ b/board/phytec/pcl063/pcl063.c > @@ -178,7 +178,9 @@ int board_phy_config(struct phy_device *phydev) > int board_early_init_f(void) { > setup_iomux_uart(); > +#ifdef CONFIG_FEC_MXC > setup_iomux_fec(); > +#endif >
Reviewed-by: Peng Fan <peng....@nxp.com> It would be better if dm pinctrl used. Regards, Peng. > return 0; > } > -- > 2.21.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot