This reverts commit fc04b923541d984b1544056fd3bfa8129d4e5aac where the
FVP DRAM configuration was added.
Signed-off-by: Ryan Harkin <ryan.har...@linaro.org>
---
arch/arm/Kconfig | 10 -------
board/armltd/vexpress64/Kconfig | 2 +-
board/armltd/vexpress64/MAINTAINERS | 5 ----
configs/vexpress_aemv8a_dram_defconfig | 39 --------------------------
include/configs/vexpress_aemv8a.h | 17 ++---------
5 files changed, 3 insertions(+), 70 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cbb2a2a158..12d5d0fef6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1066,16 +1066,6 @@ config TARGET_VEXPRESS64_BASE_FVP
select PL01X_SERIAL
select SEMIHOSTING
-config TARGET_VEXPRESS64_BASE_FVP_DRAM
- bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
- select ARM64
- select PL01X_SERIAL
- help
- This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
- the default config to allow the user to load the images directly into
- DRAM using model parameters rather than by using semi-hosting to load
- the files from the host filesystem.
-
config TARGET_VEXPRESS64_JUNO
bool "Support Versatile Express Juno Development Platform"
select ARM64
diff --git a/board/armltd/vexpress64/Kconfig b/board/armltd/vexpress64/Kconfig
index e05f353b80..9014418433 100644
--- a/board/armltd/vexpress64/Kconfig
+++ b/board/armltd/vexpress64/Kconfig
@@ -1,4 +1,4 @@
-if TARGET_VEXPRESS64_BASE_FVP || TARGET_VEXPRESS64_JUNO ||
TARGET_VEXPRESS64_BASE_FVP_DRAM
+if TARGET_VEXPRESS64_BASE_FVP || TARGET_VEXPRESS64_JUNO
config SYS_BOARD
default "vexpress64"
diff --git a/board/armltd/vexpress64/MAINTAINERS
b/board/armltd/vexpress64/MAINTAINERS
index 15b0a08646..0ba044d7ff 100644
--- a/board/armltd/vexpress64/MAINTAINERS
+++ b/board/armltd/vexpress64/MAINTAINERS
@@ -10,11 +10,6 @@ M: Linus Walleij <linus.wall...@linaro.org>
S: Maintained
F: configs/vexpress_aemv8a_semi_defconfig
-VEXPRESS_AEMV8A_DRAM BOARD
-M: Ryan Harkin <ryan.har...@linaro.org>
-S: Maintained
-F: configs/vexpress_aemv8a_dram_defconfig
-
JUNO DEVELOPMENT PLATFORM BOARD
M: Linus Walleij <linus.wall...@linaro.org>
S: Maintained
diff --git a/configs/vexpress_aemv8a_dram_defconfig
b/configs/vexpress_aemv8a_dram_defconfig
deleted file mode 100644
index 51860da387..0000000000
--- a/configs/vexpress_aemv8a_dram_defconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM=y
-CONFIG_SYS_TEXT_BASE=0x88000000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_IDENT_STRING=" vexpress_aemv8a"
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTDELAY=1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0 earlycon=pl011,0x1c090000 debug user_debug=31
androidboot.hardware=fvpbase root=/dev/vda2 rw rootwait loglevel=9"
-# CONFIG_USE_BOOTCOMMAND is not set
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SYS_PROMPT="VExpress64# "
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_ARMFLASH=y
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_MISC is not set
-CONFIG_CMD_UBI=y
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_DM=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_DEVICE=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_SERIAL=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/vexpress_aemv8a.h
b/include/configs/vexpress_aemv8a.h
index 9746470552..b2c14f9e10 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -16,8 +16,7 @@
#define CONFIG_REMAKE_ELF
/* Link Definitions */
-#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
- defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
/* ATF loads u-boot here for BASE_FVP model */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
#elif CONFIG_TARGET_VEXPRESS64_JUNO
@@ -83,8 +82,7 @@
#define GICR_BASE (0x2f100000)
#else
-#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
- defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
#define GICD_BASE (0x2f000000)
#define GICC_BASE (0x2c000000)
#elif CONFIG_TARGET_VEXPRESS64_JUNO
@@ -191,17 +189,6 @@
"booti $kernel_addr - $fdt_addr"
-#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_addr=0x80080000\0" \
- "initrd_addr=0x84000000\0" \
- "fdt_addr=0x83000000\0" \
- "fdt_high=0xffffffffffffffff\0" \
- "initrd_high=0xffffffffffffffff\0"
-
-#define CONFIG_BOOTCOMMAND "booti $kernel_addr $initrd_addr $fdt_addr"
-
-
#endif
/* Monitor Command Prompt */
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
