On 8/27/19 2:34 AM, Peng Fan wrote:
Hi Eddie,
Subject: [PATCH v3 2/4] mmc: Add Aspeed SD controller driver
This patch could not be applied to latest tree, could you please check?
Sorry I was a little behind master. I just sent this patch rebased.
Thanks,
Eddie
Thanks,
Peng.
Add support for the Aspeed SD host controller engine.
Signed-off-by: Eddie James <eaja...@linux.ibm.com>
---
arch/arm/include/asm/gpio.h | 3 +-
drivers/mmc/Kconfig | 11 ++++++
drivers/mmc/Makefile | 1 +
drivers/mmc/aspeed_sdhci.c | 90
+++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 104 insertions(+), 1 deletion(-) create mode 100644
drivers/mmc/aspeed_sdhci.c
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 370031f..38a5922 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -1,6 +1,7 @@
#if !defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARCH_STI) &&
\
!defined(CONFIG_ARCH_K3) && !defined(CONFIG_ARCH_BCM6858) &&
\
- !defined(CONFIG_ARCH_BCM63158)
&& !defined(CONFIG_ARCH_ROCKCHIP)
+ !defined(CONFIG_ARCH_BCM63158)
&& !defined(CONFIG_ARCH_ROCKCHIP) && \
+ !defined(CONFIG_ARCH_ASPEED)
#include <asm/arch/gpio.h>
#endif
#include <asm-generic/gpio.h>
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index
c6812f6..536f66a 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -421,6 +421,17 @@ config SPL_MMC_SDHCI_ADMA
This enables support for the ADMA (Advanced DMA) defined
in the SD Host Controller Standard Specification Version 3.00 in SPL.
+config MMC_SDHCI_ASPEED
+ bool "Aspeed SDHCI controller"
+ depends on ARCH_ASPEED
+ depends on DM_MMC
+ depends on MMC_SDHCI
+ help
+ Enables support for the Aspeed SDHCI 2.0 controller present on
Aspeed
+ SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
+ specifications. On the AST2600, the device is also compatible with
+ MMC 5.1 and eMMC 3.0.
+
config MMC_SDHCI_ATMEL
bool "Atmel SDHCI controller support"
depends on ARCH_AT91
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index
6cc018b..5594195 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_JZ47XX_MMC) += jz_mmc.o
# SDHCI
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
+obj-$(CONFIG_MMC_SDHCI_ASPEED) += aspeed_sdhci.o
obj-$(CONFIG_MMC_SDHCI_ATMEL) += atmel_sdhci.o
obj-$(CONFIG_MMC_SDHCI_BCM2835) += bcm2835_sdhci.o
obj-$(CONFIG_MMC_SDHCI_BCMSTB) += bcmstb_sdhci.o
diff --git a/drivers/mmc/aspeed_sdhci.c b/drivers/mmc/aspeed_sdhci.c new
file mode 100644 index 0000000..1321ec3
--- /dev/null
+++ b/drivers/mmc/aspeed_sdhci.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 IBM Corp.
+ * Eddie James <eaja...@linux.ibm.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <malloc.h>
+#include <sdhci.h>
+
+struct aspeed_sdhci_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
+static int aspeed_sdhci_probe(struct udevice *dev) {
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
+ struct sdhci_host *host = dev_get_priv(dev);
+ u32 max_clk;
+ struct clk clk;
+ int ret;
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(&clk);
+ if (ret)
+ goto free;
+
+ host->name = dev->name;
+ host->ioaddr = (void *)devfdt_get_addr(dev);
+
+ max_clk = clk_get_rate(&clk);
+ if (IS_ERR_VALUE(max_clk)) {
+ ret = max_clk;
+ goto err;
+ }
+
+ host->max_clk = max_clk;
+ host->mmc = &plat->mmc;
+ host->mmc->dev = dev;
+ host->mmc->priv = host;
+ upriv->mmc = host->mmc;
+
+ ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
+ if (ret)
+ goto err;
+
+ ret = sdhci_probe(dev);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ clk_disable(&clk);
+free:
+ clk_free(&clk);
+ return ret;
+}
+
+static int aspeed_sdhci_bind(struct udevice *dev) {
+ struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
+
+ return sdhci_bind(dev, &plat->mmc, &plat->cfg); }
+
+static const struct udevice_id aspeed_sdhci_ids[] = {
+ { .compatible = "aspeed,ast2400-sdhci" },
+ { .compatible = "aspeed,ast2500-sdhci" },
+ { .compatible = "aspeed,ast2600-sdhci" },
+ { }
+};
+
+U_BOOT_DRIVER(aspeed_sdhci_drv) = {
+ .name = "aspeed_sdhci",
+ .id = UCLASS_MMC,
+ .of_match = aspeed_sdhci_ids,
+ .ops = &sdhci_ops,
+ .bind = aspeed_sdhci_bind,
+ .probe = aspeed_sdhci_probe,
+ .priv_auto_alloc_size = sizeof(struct sdhci_host),
+ .platdata_auto_alloc_size = sizeof(struct aspeed_sdhci_plat), };
--
1.8.3.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
