Hi Jean, > > Hi Marek, Sherry, > > > >>>> we keep the cdns3 node for usb gadget driver, then add a usb host > >>>> node for > >>>> xhci-imx8 driver in *-uboot.dtsi. so here is no need to change the > >>>> host driver > >>> compatible. > >>>> But the compatible in gadget driver should be changed later. > >>> We should try avoiding ABI breaks in DT. > >> But the cdns3 usb gaget driver and host driver in different uclass need two > dt nodes to bind with. > >> And the compatible of the two node cannot be same. > >> So for gadget driver, the compatible may use "cdns,usb3-1.0.0", for host > driver, the compatible will use "cdns,usb3-1.0.0-host". > >> What do you think about it? > > CCing Jean, since I think he did solve similar topic for his platform. > > I've been OOO for a few weeks and didn't look at the whole series. > > For this particular issue, the solution I used is to let the wrapper do the > binding job. The name of the driver to use is hard-coded in the wrapper diver. > > This is done in dwc3_glue_bind().
Thanks for your suggestions. So if I want to use the cdns3 usb node as both usb gadget device and usb host device, do you mean that I should make the cdns3 usb node as a usb wrapper device, and create two subnodes in it. Then when binding the wrapper node, it will hard-coded the two subnodes to different driver(gadge/host driver) according to the dr_mode property in nodes. Best regards Sherry sun > > JJ > > > > > > >>>>>> + { } > >>>>>> +}; > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot