On 30/08/19, Peng Fan wrote: > > Subject: [PATCH v2] imx: support i.MX8QM ROM 7720 a1 board > > > > Add i.MX8QM ROM 7720a1 board support > > > > Boot log as below: > > U-Boot 2019.07-00001-g6c912ea4d4 (Aug 28 2019 - 13:01:45 +0200) > > > > CPU: NXP i.MX8QM RevB A53 at 1200 MHz > > > > Model: Advantech iMX8QM Qseven series > > Board: ROM-7720-A1 4GB > > Build: SCFW 65afe5f6 > > Boot: SD2 > > DRAM: 3.9 GiB > > MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 > > Loading Environment from MMC... OK > > In: serial@5a060000 > > Out: serial@5a060000 > > Err: serial@5a060000 > > Net: eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1 > > , eth-1: ethernet@5b050000 > > Hit any key to stop autoboot: 0 > > > > Signed-off-by: Oliver Graute <oliver.gra...@kococonnector.com> > > Cc: Stefano Babic <sba...@denx.de> > > Cc: Fabio Estevam <feste...@gmail.com> > > Cc: Peng Fan <peng....@nxp.com> > > Cc: Simon Glass <s...@chromium.org> > > Cc: Ye Li <ye...@nxp.com> > > Cc: uboot-imx <uboot-...@nxp.com> > > --- > > > > These changes are based on this vendor tree: > > Please use imx/master or upstream master branch for your development.
ok I can apply the Patch on imx custodian tree. But I run into some wired linking errors. For the first there exist already a patch from Igor which is not applied in tree yet. https://lists.denx.de/pipermail/u-boot/2019-August/380468.html The next errors are multiple defintions of some functions: drivers/mmc/fsl_esdhc_imx.o: In function `fdt_fixup_esdhc': /home/graute/test/u-boot-imx/drivers/mmc/fsl_esdhc_imx.c:1382: multiple definition of `fdt_fixup_esdhc' drivers/mmc/fsl_esdhc.o:/home/graute/test/u-boot-imx/drivers/mmc/fsl_esdhc.c:932: first defined here drivers/mmc/fsl_esdhc_imx.o:/home/graute/test/u-boot-imx/drivers/mmc/fsl_esdhc_imx.c:1661: multiple definition of `_u_boot_list_2_driver_2_fsl_esdhc' drivers/mmc/fsl_esdhc.o:/home/graute/test/u-boot-imx/drivers/mmc/fsl_esdhc.c:1101: first defined here scripts/Makefile.build:355: recipe for target 'drivers/mmc/built-in.o' failed make[2]: *** [drivers/mmc/built-in.o] Error 1 scripts/Makefile.build:432: recipe for target 'drivers/mmc' failed make[1]: *** [drivers/mmc] Error 2 Makefile:1588: recipe for target 'drivers' failed make: *** [drivers] Error 2 Someone a clue howto fix these errors? Best Regards, Oliver _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot