Commit e37ac71 converted FSL_ESDHC to FSL_ESDHC_IMX, but the config
check for colibri_imx6 wasn't updated accordantly.
Signed-off-by: Ricardo Salveti <rica...@foundries.io>
---
board/toradex/colibri_imx6/colibri_imx6.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c
b/board/toradex/colibri_imx6/colibri_imx6.c
index ad40b589c1..44173dde1f 100644
--- a/board/toradex/colibri_imx6/colibri_imx6.c
+++ b/board/toradex/colibri_imx6/colibri_imx6.c
@@ -83,7 +83,7 @@ iomux_v3_cfg_t const uart1_pads[] = {
MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-#if defined(CONFIG_FSL_ESDHC) && defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD)
/* Colibri MMC */
iomux_v3_cfg_t const usdhc1_pads[] = {
MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -304,7 +304,7 @@ int board_ehci_hcd_init(int port)
}
#endif
-#if defined(CONFIG_FSL_ESDHC) && defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD)
/* use the following sequence: eMMC, MMC */
struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = {
{USDHC3_BASE_ADDR},
--
2.23.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
