U-Boot now supports the "skip_check" flag to optionally skip the CRC
check at open time. Currently its only possible to set this bit upon
UBI volume creation. But it might be very useful to also set this bit
on already installed systems (e.g. field upgrade) to make also use of
the boot-time decrease on those systems.
This patch now adds a new "ubi" command "ubi skipcheck" to set or clear
this bit in the UBI volume header:
=> ubi skipcheck rootfs0 on
Setting skip_check on volume rootfs0
BTW: This saves approx. 10 seconds Linux bootup time on a MT7688 based
target with 128MiB of SPI NAND.
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Quentin Schulz <quentin.sch...@bootlin.com>
Cc: Boris Brezillon <boris.brezil...@bootlin.com>
Cc: Heiko Schocher <h...@denx.de>
---
cmd/ubi.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/cmd/ubi.c b/cmd/ubi.c
index c857f07d93..42b5641b32 100644
--- a/cmd/ubi.c
+++ b/cmd/ubi.c
@@ -419,6 +419,30 @@ static int ubi_dev_scan(struct mtd_info *info, const char
*vid_header_offset)
return 0;
}
+static int ubi_set_skip_check(char *volume, bool skip_check)
+{
+ struct ubi_vtbl_record vtbl_rec;
+ struct ubi_volume *vol;
+
+ vol = ubi_find_volume(volume);
+ if (vol == NULL)
+ return ENODEV;
+
+ printf("%sing skip_check on volume %s\n",
+ skip_check ? "Sett" : "Clear", volume);
+
+ vtbl_rec = ubi->vtbl[vol->vol_id];
+ if (skip_check) {
+ vtbl_rec.flags |= UBI_VTBL_SKIP_CRC_CHECK_FLG;
+ vol->skip_check = 1;
+ } else {
+ vtbl_rec.flags &= ~UBI_VTBL_SKIP_CRC_CHECK_FLG;
+ vol->skip_check = 0;
+ }
+
+ return ubi_change_vtbl_record(ubi, vol->vol_id, &vtbl_rec);
+}
+
static int ubi_detach(void)
{
#ifdef CONFIG_CMD_UBIFS
@@ -578,6 +602,14 @@ static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
return ubi_remove_vol(argv[2]);
}
+ if (strncmp(argv[1], "skipcheck", 9) == 0) {
+ /* E.g., change skip_check flag */
+ if (argc == 4) {
+ skipcheck = strncmp(argv[3], "on", 2) == 0;
+ return ubi_set_skip_check(argv[2], skipcheck);
+ }
+ }
+
if (strncmp(argv[1], "write", 5) == 0) {
int ret;
@@ -658,6 +690,8 @@ U_BOOT_CMD(
" - Read volume to address with size\n"
"ubi remove[vol] volume"
" - Remove volume\n"
+ "ubi skipcheck volume on/off"
+ " - Set or clear skip_check flag in volume header\n"
"[Legends]\n"
" volume: character name\n"
" size: specified in bytes\n"
--
2.23.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
