Hi Tom On Fri, Sep 13, 2019 at 5:47 PM Tom Rini <tr...@konsulko.com> wrote: > > On Fri, Sep 13, 2019 at 08:11:17AM +0530, Jagan Teki wrote: > > On Thu, Sep 12, 2019 at 8:25 PM Tom Rini <tr...@konsulko.com> wrote: > > > > > > On Thu, Sep 12, 2019 at 08:55:24AM +0530, Jagan Teki wrote: > > > > > > > I have seen this even on v2019.07 release, and the only release that > > > > it got working with on v2019.01 (SPL, BROM_RETURN) > > > > > > > > Any idea? here is the log dump. > > > > > > > > U-Boot TPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36) > > > > Trying to boot from BOOTROM > > > > Returning to boot ROM... > > > > > > > > U-Boot SPL 2019.10-rc3-00297-g5ba8b12543 (Sep 12 2019 - 08:50:36 +0530) > > > > Trying to boot from MMC1 > > > > spl: mmc init failed with error: -110 > > > > SPL: failed to boot from all boot devices > > > > ### ERROR ### Please RESET the board ### > > > > > > Time to run 'git bisect' since you know when it worked last at least? > > > > Look hard to bisect, few of commits in between seems SPL size > > blow-out, doesn't boot etc. May be verify with respect boards might > > help. > > It certainly sounds like a challenging bisect, yes. I've 'bisect > skip'ed and then 'git stash save' / 'git stash apply' a handful of > work-arounds to narrow down hard cases like this before. It's also > worth keeping in mind that you can insert steps manually into a bisect. > For something like this where v2019.01 works and HEAD doesn't, I'd do: > $ git bisect start > $ git bisect good v2019.01 > $ git bisect bad v2019.10-rc3 > $ git checkout v2019.04 > and see what happens. U-Boot TPL 2019.10-rc3-00307-g87d5b22558-dirty (Sep 13 2019 - 20:06:40) Trying to boot from BOOTROM Returning to boot ROM...
U-Boot SPL 2019.10-rc3-00307-g87d5b22558-dirty (Sep 13 2019 - 20:06:40 +0200) Trying to boot from MMC1 Buswidth = 0, clock: 0 Buswidth = 1, clock: 0 Buswidth = 1, clock: 400000 Sending CMD0 Sending CMD8 Sending CMD55 Sending CMD41 Sending CMD55 Sending CMD41 Sending CMD2 Sending CMD3 Sending CMD9 Sending CMD7 Sending CMD55 Sending CMD51 dwmci_data_transfer: Timeout waiting for data! wait_for_bit_le32: Timeout (reg= mask=2 wait_set=) dwmci_send_cmd: DWMCI_IDINTEN mask 0x2 timeout. Sending CMD51 dwmci_send_cmd: Response Timeout. Sending CMD51 dwmci_send_cmd: Response Timeout. Sending CMD51 dwmci_send_cmd: Response Timeout. spl: mmc init failed with error: -110 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### It's broken since a lot most of the version does not boot because SPL is too big. This the problem I have in debug CMD51 is get_capabilitis Michael > > -- > Tom > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot