This patch adds support for the T3CORP board, based on the
AppliedMicro (AMCC) PPC460GT.

Signed-off-by: Stefan Roese <s...@denx.de>
---
v2: - Fixed spelling: fibre -> fiber
    - Rebased on next, no changes to toplevel Makefile needed anymore

 MAINTAINERS                |    1 +
 MAKEALL                    |    1 +
 board/t3corp/Makefile      |   53 +++++
 board/t3corp/chip_config.c |   59 +++++
 board/t3corp/config.mk     |   39 ++++
 board/t3corp/init.S        |   99 ++++++++
 board/t3corp/t3corp.c      |  198 ++++++++++++++++
 boards.cfg                 |    1 +
 include/configs/t3corp.h   |  544 ++++++++++++++++++++++++++++++++++++++++++++
 9 files changed, 995 insertions(+), 0 deletions(-)
 create mode 100644 board/t3corp/Makefile
 create mode 100644 board/t3corp/chip_config.c
 create mode 100644 board/t3corp/config.mk
 create mode 100644 board/t3corp/init.S
 create mode 100644 board/t3corp/t3corp.c
 create mode 100644 include/configs/t3corp.h

diff --git a/MAINTAINERS b/MAINTAINERS
index d7aec98..9485070 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -392,6 +392,7 @@ Stefan Roese <s...@denx.de>
        rainier         PPC440GRx
        sequoia         PPC440EPx
        sycamore        PPC405GPr
+       t3corp          PPC460GT
        taishan         PPC440GX
        walnut          PPC405GP
        yellowstone     PPC440GR
diff --git a/MAKEALL b/MAKEALL
index d6d5f5b..51de8fc 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -262,6 +262,7 @@ LIST_4xx="          \
        sc3             \
        sequoia         \
        sequoia_nand    \
+       t3corp          \
        taihu           \
        taishan         \
        v5fx30teval     \
diff --git a/board/t3corp/Makefile b/board/t3corp/Makefile
new file mode 100644
index 0000000..e2bb546
--- /dev/null
+++ b/board/t3corp/Makefile
@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2010
+# Stefan Roese, DENX Software Engineering, s...@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).a
+
+COBJS-y        := $(BOARD).o
+COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
+SOBJS  := init.o
+
+COBJS   := $(COBJS-y)
+SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS))
+SOBJS  := $(addprefix $(obj),$(SOBJS))
+
+$(LIB):        $(OBJS) $(SOBJS)
+       $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+       rm -f $(SOBJS) $(OBJS)
+
+distclean:     clean
+       rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/t3corp/chip_config.c b/board/t3corp/chip_config.c
new file mode 100644
index 0000000..c00bf16
--- /dev/null
+++ b/board/t3corp/chip_config.c
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, s...@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+       {
+               "600", "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+               {
+                       0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
+                       0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+               }
+       },
+       {
+               "800", "CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+               {
+                       0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
+                       0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+               }
+       },
+       {
+               "1000", "CPU:1000 PLB: 200 OPB: 100 EBC: 100",
+               {
+                       0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0,
+                       0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+               }
+       },
+       {
+               "1066", "CPU:1066 PLB: 266 OPB:  88 EBC:  88",
+               {
+                       0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0,
+                       0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+               }
+       },
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/t3corp/config.mk b/board/t3corp/config.mk
new file mode 100644
index 0000000..616aa19
--- /dev/null
+++ b/board/t3corp/config.mk
@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2010
+# Stefan Roese, DENX Software Engineering, s...@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/t3corp/init.S b/board/t3corp/init.S
new file mode 100644
index 0000000..4a4217f
--- /dev/null
+++ b/board/t3corp/init.S
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, s...@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm/mmu.h>
+
+/*
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ */
+       .section .bootpg,"ax"
+       .globl tlbtab
+
+tlbtab:
+       tlbtab_start
+
+       /*
+        * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to
+        * use the speed up boot process. It is patched after relocation to
+        * enable SA_I
+        */
+       tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M,
+                CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_RWX | SA_G)
+
+       /*
+        * TLB entries for SDRAM are not needed on this platform.
+        * They are dynamically generated in the DDR(2) detection
+        * routine.
+        */
+
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
+       /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+       tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0,
+                AC_RWX | SA_G)
+#endif
+
+       tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xc,
+                AC_RW | SA_IG)
+       tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x20000000, 0xc,
+                AC_RW | SA_IG)
+       tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xd,
+                AC_RW | SA_IG)
+
+       tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xd,
+                AC_RW | SA_IG)
+       tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xd,
+                AC_RW | SA_IG)
+       tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xd,
+                AC_RW | SA_IG)
+       tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xd,
+                AC_RW | SA_IG)
+
+       /* PCIe UTL register */
+       tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xc, AC_RW | SA_IG)
+
+       /* TLB-entry for FPGA(s) */
+       tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_1M, CONFIG_SYS_FPGA1_BASE, 4,
+                AC_RW | SA_IG)
+       tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_1M, CONFIG_SYS_FPGA2_BASE, 4,
+                AC_RW | SA_IG)
+       tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_1M, CONFIG_SYS_FPGA3_BASE, 4,
+                AC_RW | SA_IG)
+
+       /* TLB-entry for OCM */
+       tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4,
+                AC_RWX | SA_I)
+
+       /* TLB-entry for Local Configuration registers => peripherals */
+       tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M,
+                CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_RWX | SA_IG)
+
+       tlbtab_end
diff --git a/board/t3corp/t3corp.c b/board/t3corp/t3corp.c
new file mode 100644
index 0000000..c64f100
--- /dev/null
+++ b/board/t3corp/t3corp.c
@@ -0,0 +1,198 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, s...@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc440.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <i2c.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/4xx_pcie.h>
+#include <asm/gpio.h>
+
+int board_early_init_f(void)
+{
+       /*
+        * Setup the interrupt controller polarities, triggers, etc.
+        */
+       mtdcr(UIC0SR, 0xffffffff);      /* clear all */
+       mtdcr(UIC0ER, 0x00000000);      /* disable all */
+       mtdcr(UIC0CR, 0x00000005);      /* ATI & UIC1 crit are critical */
+       mtdcr(UIC0PR, 0xffffffff);      /* per ref-board manual */
+       mtdcr(UIC0TR, 0x00000000);      /* per ref-board manual */
+       mtdcr(UIC0VR, 0x00000000);      /* int31 highest, base=0x000 */
+       mtdcr(UIC0SR, 0xffffffff);      /* clear all */
+
+       mtdcr(UIC1SR, 0xffffffff);      /* clear all */
+       mtdcr(UIC1ER, 0x00000000);      /* disable all */
+       mtdcr(UIC1CR, 0x00000000);      /* all non-critical */
+       mtdcr(UIC1PR, 0xffffffff);      /* per ref-board manual */
+       mtdcr(UIC1TR, 0x00000000);      /* per ref-board manual */
+       mtdcr(UIC1VR, 0x00000000);      /* int31 highest, base=0x000 */
+       mtdcr(UIC1SR, 0xffffffff);      /* clear all */
+
+       mtdcr(UIC2SR, 0xffffffff);      /* clear all */
+       mtdcr(UIC2ER, 0x00000000);      /* disable all */
+       mtdcr(UIC2CR, 0x00000000);      /* all non-critical */
+       mtdcr(UIC2PR, 0xffffffff);      /* per ref-board manual */
+       mtdcr(UIC2TR, 0x00000000);      /* per ref-board manual */
+       mtdcr(UIC2VR, 0x00000000);      /* int31 highest, base=0x000 */
+       mtdcr(UIC2SR, 0xffffffff);      /* clear all */
+
+       mtdcr(UIC3SR, 0xffffffff);      /* clear all */
+       mtdcr(UIC3ER, 0x00000000);      /* disable all */
+       mtdcr(UIC3CR, 0x00000000);      /* all non-critical */
+       mtdcr(UIC3PR, 0xffffffff);      /* per ref-board manual */
+       mtdcr(UIC3TR, 0x00000000);      /* per ref-board manual */
+       mtdcr(UIC3VR, 0x00000000);      /* int31 highest, base=0x000 */
+       mtdcr(UIC3SR, 0xffffffff);      /* clear all */
+
+       /*
+        * Configure PFC (Pin Function Control) registers
+        * enable GPIO 49-63
+        * UART0: 4 pins
+        */
+       mtsdr(SDR0_PFC0, 0x00007fff);
+       mtsdr(SDR0_PFC1, 0x00040000);
+
+       /* Enable PCI host functionality in SDR0_PCI0 */
+       mtsdr(SDR0_PCI0, 0xe0000000);
+
+       mtsdr(SDR0_SRST1, 0);   /* Pull AHB out of reset default=1 */
+
+       /* Setup PLB4-AHB bridge based on the system address map */
+       mtdcr(AHB_TOP, 0x8000004B);
+       mtdcr(AHB_BOT, 0x8000004B);
+
+       return 0;
+}
+
+int checkboard(void)
+{
+       char *s = getenv("serial#");
+
+       printf("Board: T3CORP");
+
+       if (s != NULL) {
+               puts(", serial# ");
+               puts(s);
+       }
+       putc('\n');
+
+       return 0;
+}
+
+int board_early_init_r(void)
+{
+       /*
+        * CompactCenter has 64MBytes, DevCon-Center 128MBytes of NOR FLASH
+        * (Spansion 29GL512), but the boot EBC mapping only supports a maximum
+        * of 16MBytes (4.ff00.0000 - 4.ffff.ffff).
+        * To solve this problem, the FLASH has to get remapped to another
+        * EBC address which accepts bigger regions:
+        *
+        * 0xfn00.0000 -> 4.cn00.0000
+        */
+
+       u32 bxcr_bw = (CONFIG_SYS_FLASH_SIZE == 128 << 20) ?
+               EBC_BXCR_BS_128MB : EBC_BXCR_BS_64MB;
+
+       /* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */
+       mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L
+               | bxcr_bw
+               | EBC_BXCR_BU_RW
+               | EBC_BXCR_BW_16BIT);
+
+       /* Remove TLB entry of boot EBC mapping */
+       remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
+
+       /* Add TLB entry for 0xfn00.0000 -> 0x4.cn00.0000 */
+       program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
+                       CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);
+
+       /*
+        * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
+        * 0xfc00.0000 is possible
+        */
+
+       /*
+        * Clear potential errors resulting from auto-calibration.
+        * If not done, then we could get an interrupt later on when
+        * exceptions are enabled.
+        */
+       set_mcsr(get_mcsr());
+
+       return 0;
+}
+
+int misc_init_r(void)
+{
+       u32 sdr0_srst1 = 0;
+       u32 eth_cfg;
+
+       /*
+        * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
+        * This is board specific, so let's do it here.
+        */
+       mfsdr(SDR0_ETH_CFG, eth_cfg);
+       /* disable SGMII mode */
+       eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE |
+                    SDR0_ETH_CFG_SGMII1_ENABLE |
+                    SDR0_ETH_CFG_SGMII0_ENABLE);
+       /* Set the for 2 RGMII mode */
+       /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
+       eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
+       eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
+       mtsdr(SDR0_ETH_CFG, eth_cfg);
+
+       /*
+        * The AHB Bridge core is held in reset after power-on or reset
+        * so enable it now
+        */
+       mfsdr(SDR0_SRST1, sdr0_srst1);
+       sdr0_srst1 &= ~SDR0_SRST1_AHB;
+       mtsdr(SDR0_SRST1, sdr0_srst1);
+
+       return 0;
+}
+
+int board_pcie_last(void)
+{
+       /*
+        * Only PCIe0 for now, PCIe1 hangs on this boards
+        */
+       return 0;
+}
+
+/*
+ * Board specific WRDTR and CLKTR values used by the auto-
+ * calibration code (4xx_ibm_ddr2_autocalib.c).
+ */
+static struct sdram_timing board_scan_options[] = {
+       {1, 2},
+       {-1, -1}
+};
+
+struct sdram_timing *ddr_scan_option(struct sdram_timing *default_val)
+{
+       return board_scan_options;
+}
diff --git a/boards.cfg b/boards.cfg
index 1a5cfb1..77feb40 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -183,6 +183,7 @@ lwmon5              powerpc ppc4xx
 ML2            powerpc ppc4xx
 sbc405         powerpc ppc4xx
 sc3            powerpc ppc4xx
+t3corp         powerpc ppc4xx
 zeus           powerpc ppc4xx
 acadia         powerpc ppc4xx          -               amcc
 bamboo         powerpc ppc4xx          -               amcc
diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h
new file mode 100644
index 0000000..ab1530a
--- /dev/null
+++ b/include/configs/t3corp.h
@@ -0,0 +1,544 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, s...@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * t3corp.h - configuration for T3CORP (460GT)
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_460GT           1       /* Specific PPC460GT    */
+#define CONFIG_440             1
+#define CONFIG_4xx             1       /* ... PPC4xx family */
+
+#define CONFIG_HOSTNAME                t3corp
+
+/*
+ * Include common defines/options for all AMCC eval boards
+ */
+#include "amcc-common.h"
+
+#define CONFIG_SYS_CLK_FREQ    66666667        /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F      1       /* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R      1       /* Call board_early_init_r */
+#define CONFIG_MISC_INIT_R             1       /* Call misc_init_r */
+#define CONFIG_BOARD_TYPES             1       /* support board types */
+#define CONFIG_FIT
+#define CFG_ALT_MEMTEST
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_PCI_MEMBASE         0x80000000      /* mapped PCI memory */
+#define CONFIG_SYS_PCI_BASE            0xd0000000      /* internal PCI regs */
+#define CONFIG_SYS_PCI_TARGBASE        CONFIG_SYS_PCI_MEMBASE
+
+#define CONFIG_SYS_PCIE_MEMBASE                0xb0000000      /* mapped PCIe 
mem */
+#define CONFIG_SYS_PCIE_MEMSIZE                0x08000000      /* incr for 
PCIe */
+#define CONFIG_SYS_PCIE_BASE           0xc4000000      /* PCIe UTL regs */
+
+#define CONFIG_SYS_PCIE0_CFGBASE       0xc0000000
+#define CONFIG_SYS_PCIE1_CFGBASE       0xc1000000
+#define CONFIG_SYS_PCIE0_XCFGBASE      0xc3000000
+#define CONFIG_SYS_PCIE1_XCFGBASE      0xc3001000
+
+#define        CONFIG_SYS_PCIE0_UTLBASE        0xc08010000ULL  /* 36bit phys 
addr */
+
+/* base address of inbound PCIe window */
+#define CONFIG_SYS_PCIE_INBOUND_BASE   0x000000000ULL  /* 36bit phys addr */
+
+/* EBC stuff */
+#define CONFIG_SYS_FLASH_BASE          0xFC000000      /* later mapped here */
+#define CONFIG_SYS_FLASH_SIZE          (64 << 20)
+
+#define CONFIG_SYS_FPGA1_BASE          0xe0000000
+#define CONFIG_SYS_FPGA2_BASE          0xe0100000
+#define CONFIG_SYS_FPGA3_BASE          0xe0200000
+
+#define CONFIG_SYS_BOOT_BASE_ADDR      0xFF000000      /* EBC Boot Space */
+#define CONFIG_SYS_FLASH_BASE_PHYS_H   0x4
+#define CONFIG_SYS_FLASH_BASE_PHYS_L   0xCC000000
+#define CONFIG_SYS_FLASH_BASE_PHYS \
+       (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
+       | (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
+
+#define CONFIG_SYS_OCM_BASE            0xE3000000      /* OCM: 64k */
+#define CONFIG_SYS_SRAM_BASE           0xE8000000      /* SRAM: 256k */
+#define CONFIG_SYS_LOCAL_CONF_REGS     0xEF000000
+
+#define CONFIG_SYS_PERIPHERAL_BASE     0xEF600000      /* internal periph. */
+
+#define CONFIG_SYS_AHB_BASE            0xE2000000      /* int. AHB periph. */
+
+/*
+ * Initial RAM & stack pointer (placed in OCM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_OCM_BASE     /* OCM */
+#define CONFIG_SYS_INIT_RAM_END        (4 << 10)
+#define CONFIG_SYS_GBL_DATA_SIZE       256     /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+       (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * Serial Port
+ */
+#undef CONFIG_UART1_CONSOLE    /* define this if you want console on UART1 */
+
+/*
+ * Environment
+ */
+/*
+ * Define here the location of the environment variables (FLASH).
+ */
+#define        CONFIG_ENV_IS_IN_FLASH          /* use FLASH for environment 
vars */
+
+/*
+ * FLASH related
+ */
+#define CONFIG_SYS_FLASH_CFI           /* The flash is CFI compatible  */
+#define CONFIG_FLASH_CFI_DRIVER                /* Use common CFI driver        
*/
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1       /* Use AMD reset cmd */
+
+#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max num of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT      512     /* max num of sectors p. chip*/
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase/ms*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write/ms*/
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE      /* buff'd writes (20x faster)*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO    /* 'E' for empty sector on flinfo */
+
+#define CONFIG_ENV_SECT_SIZE           0x20000 /* sector size */
+#define CONFIG_ENV_ADDR                        (CONFIG_SYS_MONITOR_BASE - \
+                                        CONFIG_ENV_SECT_SIZE)
+#define        CONFIG_ENV_SIZE                 0x4000  /* env sector size */
+
+/* Address and size of Redundant Environment Sector    */
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+
+/*
+ * DDR2 SDRAM
+ */
+#define CONFIG_AUTOCALIB       "silent\0"      /* default is non-verbose    */
+#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION      /* IBM DDR autocalibration   */
+#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION       /* dynamic DDR autocal debug */
+#undef CONFIG_PPC4xx_DDR_METHOD_A
+
+/* DDR1/2 SDRAM Device Control Register Data Values */
+/* Memory Queue */
+#define CONFIG_SYS_SDRAM_R0BAS         (SDRAM_RXBAS_SDBA_ENCODE(0) | \
+                                        SDRAM_RXBAS_SDSZ_256)
+#define CONFIG_SYS_SDRAM_R1BAS         0x00000000
+#define CONFIG_SYS_SDRAM_R2BAS         0x00000000
+#define CONFIG_SYS_SDRAM_R3BAS         0x00000000
+#define CONFIG_SYS_SDRAM_PLBADDULL     0x00000000
+#define CONFIG_SYS_SDRAM_PLBADDUHB     0x00000008
+#define CONFIG_SYS_SDRAM_CONF1LL       0x80001C00
+#define CONFIG_SYS_SDRAM_CONF1HB       0x80001C80
+#define CONFIG_SYS_SDRAM_CONFPATHB     0x10a68000
+
+#define CONFIG_DDR_ECC
+#define CONFIG_SYS_MBYTES_SDRAM                256
+
+#define CAS_LATENCY                    JEDEC_MA_MR_CL_DDR2_5_0_CLK
+
+/* DDR1/2 SDRAM Device Control Register Data Values */
+#define CONFIG_SYS_SDRAM0_MB0CF                (SDRAM_RXBAS_SDAM_MODE7         
| \
+                                        SDRAM_RXBAS_SDBE_ENABLE)
+#define CONFIG_SYS_SDRAM0_MB1CF                SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MB2CF                SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MB3CF                SDRAM_RXBAS_SDBE_DISABLE
+#define CONFIG_SYS_SDRAM0_MCOPT1       (SDRAM_MCOPT1_MCHK_GEN          | \
+                                        SDRAM_MCOPT1_PMU_OPEN          | \
+                                        SDRAM_MCOPT1_DMWD_32           | \
+                                        SDRAM_MCOPT1_8_BANKS           | \
+                                        SDRAM_MCOPT1_DDR2_TYPE         | \
+                                        SDRAM_MCOPT1_QDEP              | \
+                                        SDRAM_MCOPT1_RWOO_DISABLED     | \
+                                        SDRAM_MCOPT1_WOOO_DISABLED     | \
+                                        SDRAM_MCOPT1_DREF_NORMAL)
+#define CONFIG_SYS_SDRAM0_MCOPT2       0x00000000
+#define CONFIG_SYS_SDRAM0_MODT0                SDRAM_MODT_EB0W_ENABLE
+#define CONFIG_SYS_SDRAM0_MODT1                0x00000000
+#define CONFIG_SYS_SDRAM0_MODT2                0x00000000
+#define CONFIG_SYS_SDRAM0_MODT3                0x00000000
+#define CONFIG_SYS_SDRAM0_CODT         (SDRAM_CODT_RK0R_ON             | \
+                                        SDRAM_CODT_DQS_1_8_V_DDR2      | \
+                                        SDRAM_CODT_IO_NMODE)
+#define CONFIG_SYS_SDRAM0_RTR          SDRAM_RTR_RINT_ENCODE(1560)
+#define CONFIG_SYS_SDRAM0_INITPLR0                                     \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(80)                                  | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP))
+#define CONFIG_SYS_SDRAM0_INITPLR1                                     \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(3)                                   | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)                 | \
+        SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)                          | \
+        SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
+#define CONFIG_SYS_SDRAM0_INITPLR2                                     \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(2)                                   | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                       | \
+        SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2)                        | \
+        SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL))
+#define CONFIG_SYS_SDRAM0_INITPLR3                                     \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(2)                                   | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                       | \
+        SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3)                        | \
+        SDRAM_INITPLR_IMA_ENCODE(0))
+#define CONFIG_SYS_SDRAM0_INITPLR4                                     \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(2)                                   | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                       | \
+        SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)                         | \
+        SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_ENABLE               | \
+                                 JEDEC_MA_EMR_RTT_150OHM))
+#define CONFIG_SYS_SDRAM0_INITPLR5                                     \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(200)                                 | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                       | \
+        SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)                          | \
+        SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC             | \
+                                 CAS_LATENCY                           | \
+                                 JEDEC_MA_MR_BLEN_4                    | \
+                                 JEDEC_MA_MR_DLL_RESET))
+#define CONFIG_SYS_SDRAM0_INITPLR6                                     \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(3)                                   | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE)                 | \
+        SDRAM_INITPLR_IBA_ENCODE(0x0)                                  | \
+        SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
+#define CONFIG_SYS_SDRAM0_INITPLR7                                     \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(26)                                  | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CONFIG_SYS_SDRAM0_INITPLR8                                     \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(26)                                  | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CONFIG_SYS_SDRAM0_INITPLR9                                     \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(26)                                  | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CONFIG_SYS_SDRAM0_INITPLR10                                    \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(26)                                  | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
+#define CONFIG_SYS_SDRAM0_INITPLR11                                    \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(2)                                   | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                       | \
+        SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR)                          | \
+        SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC             | \
+                                 CAS_LATENCY                           | \
+                                 JEDEC_MA_MR_BLEN_4))
+#define CONFIG_SYS_SDRAM0_INITPLR12                                    \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(2)                                   | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                       | \
+        SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)                         | \
+        SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER                | \
+                                 JEDEC_MA_EMR_RDQS_DISABLE             | \
+                                 JEDEC_MA_EMR_DQS_ENABLE               | \
+                                 JEDEC_MA_EMR_RTT_150OHM               | \
+                                 JEDEC_MA_EMR_ODS_NORMAL))
+#define CONFIG_SYS_SDRAM0_INITPLR13                                    \
+       (SDRAM_INITPLR_ENABLE                                           | \
+        SDRAM_INITPLR_IMWT_ENCODE(2)                                   | \
+        SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR)                       | \
+        SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR)                         | \
+        SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT                 | \
+                                 JEDEC_MA_EMR_RDQS_DISABLE             | \
+                                 JEDEC_MA_EMR_DQS_ENABLE               | \
+                                 JEDEC_MA_EMR_RTT_150OHM               | \
+                                 JEDEC_MA_EMR_ODS_NORMAL))
+#define CONFIG_SYS_SDRAM0_INITPLR14    SDRAM_INITPLR_DISABLE
+#define CONFIG_SYS_SDRAM0_INITPLR15    SDRAM_INITPLR_DISABLE
+#define CONFIG_SYS_SDRAM0_RQDC         (SDRAM_RQDC_RQDE_ENABLE         | \
+                                        SDRAM_RQDC_RQFD_ENCODE(56))
+#define CONFIG_SYS_SDRAM0_RFDC         SDRAM_RFDC_RFFD_ENCODE(599)
+#define CONFIG_SYS_SDRAM0_RDCC         (SDRAM_RDCC_RDSS_T2)
+#define CONFIG_SYS_SDRAM0_DLCR         (SDRAM_DLCR_DCLM_AUTO           | \
+                                        SDRAM_DLCR_DLCS_CONT_DONE      | \
+                                        SDRAM_DLCR_DLCV_ENCODE(155))
+#define CONFIG_SYS_SDRAM0_CLKTR                SDRAM_CLKTR_CLKP_90_DEG_ADV
+#define CONFIG_SYS_SDRAM0_WRDTR                SDRAM_WRDTR_WTR_90_DEG_ADV
+#define CONFIG_SYS_SDRAM0_SDTR1                (SDRAM_SDTR1_LDOF_2_CLK         
| \
+                                        SDRAM_SDTR1_RTW_2_CLK          | \
+                                        SDRAM_SDTR1_RTRO_1_CLK)
+#define CONFIG_SYS_SDRAM0_SDTR2                (SDRAM_SDTR2_RCD_3_CLK          
| \
+                                        SDRAM_SDTR2_WTR_2_CLK          | \
+                                        SDRAM_SDTR2_XSNR_32_CLK        | \
+                                        SDRAM_SDTR2_WPC_4_CLK          | \
+                                        SDRAM_SDTR2_RPC_2_CLK          | \
+                                        SDRAM_SDTR2_RP_3_CLK           | \
+                                        SDRAM_SDTR2_RRD_2_CLK)
+#define CONFIG_SYS_SDRAM0_SDTR3                (SDRAM_SDTR3_RAS_ENCODE(8)      
| \
+                                        SDRAM_SDTR3_RC_ENCODE(11)      | \
+                                        SDRAM_SDTR3_XCS                | \
+                                        SDRAM_SDTR3_RFC_ENCODE(26))
+#define CONFIG_SYS_SDRAM0_MMODE                (SDRAM_MMODE_WR_DDR2_3_CYC      
| \
+                                        CAS_LATENCY                    | \
+                                        SDRAM_MMODE_BLEN_4)
+#define CONFIG_SYS_SDRAM0_MEMODE       (SDRAM_MEMODE_DQS_ENABLE        | \
+                                        SDRAM_MEMODE_RTT_150OHM)
+
+/*
+ * I2C
+ */
+#define CONFIG_SYS_I2C_SPEED                   400000  /* I2C speed */
+
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR             (0xa8>>1)
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
+
+/* I2C bootstrap EEPROM */
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR      0x52
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET    0
+#define CONFIG_4xx_CONFIG_BLOCKSIZE            16
+
+/*
+ * Ethernet
+ */
+#define CONFIG_IBM_EMAC4_V4    1
+
+#define CONFIG_HAS_ETH0
+
+#define CONFIG_PHY_ADDR                1       /* PHY address, See schematics  
*/
+#define CONFIG_M88E1111_PHY
+/* Disable fiber since fiber/copper auto-selection doesn't seem to work */
+#define CONFIG_M88E1111_DISABLE_FIBER
+
+#define CONFIG_PHY_RESET       1       /* reset phy upon startup       */
+#define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex 
detection */
+#define CONFIG_PHY_DYNAMIC_ANEG        1
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       CONFIG_AMCC_DEF_ENV                                             \
+       CONFIG_AMCC_DEF_ENV_POWERPC                                     \
+       CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
+       "kernel_addr=fc000000\0"                                        \
+       "fdt_addr=fc1e0000\0"                                           \
+       "ramdisk_addr=fc200000\0"                                       \
+       "pciconfighost=1\0"                                             \
+       "pcie_mode=RP:RP\0"                                             \
+       ""
+
+/*
+ * Commands additional to the ones defined in amcc-common.h
+ */
+#define CONFIG_CMD_CHIP_CONFIG
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SDRAM
+
+/*
+ * PCI stuff
+ */
+/* General PCI */
+#define CONFIG_PCI                     /* include pci support          */
+#define CONFIG_PCI_PNP                 /* do pci plug-and-play   */
+#define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup  */
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/* Board-specific PCI, no PCI support, only PCIe */
+#undef CONFIG_SYS_PCI_TARGET_INIT
+#undef CONFIG_SYS_PCI_MASTER_INIT
+
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014  /* IBM */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe  /* Whatever */
+
+
+/*
+ * External Bus Controller (EBC) Setup
+ */
+
+/*
+ * T3CORP has 64MBytes of NOR FLASH (Spansion 29GL512), but the
+ * boot EBC mapping only supports a maximum of 16MBytes
+ * (4.ff00.0000 - 4.ffff.ffff).
+ * To solve this problem, the FLASH has to get remapped to another
+ * EBC address which accepts bigger regions:
+ *
+ * 0xfc00.0000 -> 4.cc00.0000
+ */
+
+/* Memory Bank 0 (NOR-FLASH) */
+#define CONFIG_SYS_EBC_PB0AP   (EBC_BXAP_BME_DISABLED          |       \
+                                EBC_BXAP_TWT_ENCODE(16)        |       \
+                                EBC_BXAP_BCE_DISABLE           |       \
+                                EBC_BXAP_BCT_2TRANS            |       \
+                                EBC_BXAP_CSN_ENCODE(1)         |       \
+                                EBC_BXAP_OEN_ENCODE(1)         |       \
+                                EBC_BXAP_WBN_ENCODE(1)         |       \
+                                EBC_BXAP_WBF_ENCODE(1)         |       \
+                                EBC_BXAP_TH_ENCODE(7)          |       \
+                                EBC_BXAP_RE_DISABLED           |       \
+                                EBC_BXAP_SOR_DELAYED           |       \
+                                EBC_BXAP_BEM_WRITEONLY         |       \
+                                EBC_BXAP_PEN_DISABLED)
+#define CONFIG_SYS_EBC_PB0CR   (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_BOOT_BASE_ADDR) 
| \
+                                EBC_BXCR_BS_16MB               |       \
+                                EBC_BXCR_BU_RW                 |       \
+                                EBC_BXCR_BW_16BIT)
+
+/* Memory Bank 1 (FPGA 1) */
+#define CONFIG_SYS_EBC_PB1AP   (EBC_BXAP_BME_DISABLED          |       \
+                                EBC_BXAP_TWT_ENCODE(5)         |       \
+                                EBC_BXAP_CSN_ENCODE(0)         |       \
+                                EBC_BXAP_OEN_ENCODE(4)         |       \
+                                EBC_BXAP_WBN_ENCODE(0)         |       \
+                                EBC_BXAP_WBF_ENCODE(0)         |       \
+                                EBC_BXAP_TH_ENCODE(1)          |       \
+                                EBC_BXAP_RE_DISABLED           |       \
+                                EBC_BXAP_SOR_DELAYED           |       \
+                                EBC_BXAP_BEM_RW                |       \
+                                EBC_BXAP_PEN_DISABLED)
+#define CONFIG_SYS_EBC_PB1CR   (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \
+                                EBC_BXCR_BS_1MB                |       \
+                                EBC_BXCR_BU_RW                 |       \
+                                EBC_BXCR_BW_32BIT)
+
+/* Memory Bank 2 (FPGA 2) */
+#define CONFIG_SYS_EBC_PB2AP   (EBC_BXAP_BME_DISABLED          |       \
+                                EBC_BXAP_TWT_ENCODE(5)         |       \
+                                EBC_BXAP_CSN_ENCODE(0)         |       \
+                                EBC_BXAP_OEN_ENCODE(4)         |       \
+                                EBC_BXAP_WBN_ENCODE(0)         |       \
+                                EBC_BXAP_WBF_ENCODE(0)         |       \
+                                EBC_BXAP_TH_ENCODE(1)          |       \
+                                EBC_BXAP_RE_DISABLED           |       \
+                                EBC_BXAP_SOR_DELAYED           |       \
+                                EBC_BXAP_BEM_RW                |       \
+                                EBC_BXAP_PEN_DISABLED)
+#define CONFIG_SYS_EBC_PB2CR   (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA2_BASE) | \
+                                EBC_BXCR_BS_1MB                |       \
+                                EBC_BXCR_BU_RW                 |       \
+                                EBC_BXCR_BW_32BIT)
+
+/* Memory Bank 3 (FPGA 3) */
+#define CONFIG_SYS_EBC_PB3AP   (EBC_BXAP_BME_DISABLED          |       \
+                                EBC_BXAP_TWT_ENCODE(5)         |       \
+                                EBC_BXAP_CSN_ENCODE(0)         |       \
+                                EBC_BXAP_OEN_ENCODE(4)         |       \
+                                EBC_BXAP_WBN_ENCODE(0)         |       \
+                                EBC_BXAP_WBF_ENCODE(0)         |       \
+                                EBC_BXAP_TH_ENCODE(1)          |       \
+                                EBC_BXAP_RE_DISABLED           |       \
+                                EBC_BXAP_SOR_DELAYED           |       \
+                                EBC_BXAP_BEM_RW                |       \
+                                EBC_BXAP_PEN_DISABLED)
+#define CONFIG_SYS_EBC_PB3CR   (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA3_BASE) | \
+                                EBC_BXCR_BS_1MB                |       \
+                                EBC_BXCR_BU_RW                 |       \
+                                EBC_BXCR_BW_32BIT)
+
+/*
+ * PPC4xx GPIO Configuration
+ */
+
+#define CONFIG_SYS_4xx_GPIO_TABLE { /*           GPIO  Alternate1      
Alternate2      Alternate3 */ \
+{                                                                              
        \
+/* GPIO Core 0 */                                                              
        \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0        GMC1TxD(0)      
USB2HostD(0)    */      \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1        GMC1TxD(1)      
USB2HostD(1)    */      \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2        GMC1TxD(2)      
USB2HostD(2)    */      \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3        GMC1TxD(3)      
USB2HostD(3)    */      \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4        GMC1TxD(4)      
USB2HostD(4)    */      \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5        GMC1TxD(5)      
USB2HostD(5)    */      \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6        GMC1TxD(6)      
USB2HostD(6)    */      \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7        GMC1TxD(7)      
USB2HostD(7)    */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8        GMC1RxD(0)      
USB2OTGD(0)     */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9        GMC1RxD(1)      
USB2OTGD(1)     */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2)    
USB2OTGD(2)     */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3)    
USB2OTGD(3)     */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4)    
USB2OTGD(4)     */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5)    
USB2OTGD(5)     */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6)    
USB2OTGD(6)     */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7)    
USB2OTGD(7)     */      \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMC1TxER      
USB2HostStop    */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD                
USB2HostNext    */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER      
USB2HostDir     */      \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMC1TxEN      
USB2OTGStop     */      \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS       
USB2OTGNext     */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV      
USB2OTGDir      */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY                 
        */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN                 
        */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN                 
        */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE                 
        */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE                 
        */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0)                
                */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1)                
                */      \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2)                
                */      \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0       DMAReq2 
        IRQ(7)*/ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1       DMAAck2 
        IRQ(8)*/ \
+},                                                                             
        \
+{                                                                              
        \
+/* GPIO Core 1 */                                                              
        \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2       
EOT2/TC2        IRQ(9)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3       DMAReq3 
        IRQ(4)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N   
UART1_DSR_CTS_N UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N 
UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N 
DMAAck3      UART3_SIN*/ \
+{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N   
EOT3/TC3        UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N   
UART1_SOUT      */      \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N    
UART1_SIN       */      \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3)                
                */      \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1)                 
        */      \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2)                 
        */      \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3)         DMAReq1 
        IRQ(10)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4)         DMAAck1 
        IRQ(11)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5)         EOT/TC1 
        IRQ(12)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5)    DMAReq0 
        IRQ(13)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6)    DMAAck0 
        IRQ(14)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7)    EOT/TC0 
        IRQ(15)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62  Unselect via 
TraceSelect Bit */      \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  Unselect via 
TraceSelect Bit */      \
+}                                                                              
        \
+}
+
+#endif /* __CONFIG_H */
-- 
1.7.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to