On Thu, Sep 5, 2019 at 6:50 PM Philippe Reynes
<philippe.rey...@softathome.com> wrote:
>
> This commit add a generic function board_init_r that
> only initialize some device (for example serial). It
> avoid to define a board function only to launch the
> serial configuration.
>
> Signed-off-by: Philippe Reynes <philippe.rey...@softathome.com>
> ---
>  common/spl/Kconfig |  8 ++++++++
>  common/spl/spl.c   | 19 +++++++++++++++++++
>  2 files changed, 27 insertions(+)
>
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index f467eca..d5b331a 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -25,6 +25,14 @@ config SPL_FRAMEWORK
>           supports MMC, NAND and YMODEM and other methods loading of U-Boot
>           and the Linux Kernel.  If unsure, say Y.
>
> +config SPL_FRAMEWORK_BOARD_INIT_F
> +       bool "Define a generic function board_init_f"
> +       depends on SPL_FRAMEWORK
> +       default n
> +       help
> +         Define a generic function board_init_f, unless you want to
> +         provide your own board_init_f, you should say Y.
> +
>  config SPL_SIZE_LIMIT
>         int "Maximum size of SPL image"
>         depends on SPL
> diff --git a/common/spl/spl.c b/common/spl/spl.c
> index 082fa2b..73bf984 100644
> --- a/common/spl/spl.c
> +++ b/common/spl/spl.c
> @@ -566,6 +566,25 @@ static int boot_from_devices(struct spl_image_info 
> *spl_image,
>         return -ENODEV;
>  }
>
> +#if defined(CONFIG_SPL_FRAMEWORK_BOARD_INIT_F)
> +void board_init_f(ulong dummy)

You're actually defining 'board_init_f' here, not 'board_init_r' like
the commit message says...

Regards,
Simon

> +{
> +#if CONFIG_IS_ENABLED(OF_CONTROL)
> +       int ret;
> +
> +       ret = spl_early_init();
> +       if (ret) {
> +               debug("spl_early_init() failed: %d\n", ret);
> +               hang();
> +       }
> +#endif
> +
> +#if CONFIG_IS_ENABLED(SERIAL_SUPPORT)
> +       preloader_console_init();
> +#endif
> +}
> +#endif
> +
>  void board_init_r(gd_t *dummy1, ulong dummy2)
>  {
>         u32 spl_boot_list[] = {
> --
> 2.7.4
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to