From: Matthias Brugger <mbrug...@suse.com>
As part of the effort to create one binary for several bcm83x SoCs
we use the SoC compatible to decide which IO base address we use.
Signed-off-by: Matthias Brugger <mbrug...@suse.com>
---
arch/arm/mach-bcm283x/Kconfig | 6 ----
arch/arm/mach-bcm283x/init.c | 60 ++++++++++++++++++++++++++++++++++-
2 files changed, 59 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
index b08275f598..e8e0ff0eb4 100644
--- a/arch/arm/mach-bcm283x/Kconfig
+++ b/arch/arm/mach-bcm283x/Kconfig
@@ -202,10 +202,4 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "rpi"
-config BCM283x_BASE
- hex
- default "0x20000000" if BCM2835
- default "0x3f000000" if BCM2836 || BCM2837
- default "0xfe000000" if BCM2711
-
endmenu
diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c
index 9dcc96ba2e..214e1078eb 100644
--- a/arch/arm/mach-bcm283x/init.c
+++ b/arch/arm/mach-bcm283x/init.c
@@ -7,9 +7,49 @@
*/
#include <common.h>
+#include <dm/device.h>
+
+#define PDATA_BCM2835 0
+#define PDATA_BCM2836 1
+#define PDATA_BCM2837 2
+#define PDATA_BCM2838 3
extern unsigned long rpi_bcm283x_base;
+struct bcm283x_pdata {
+ unsigned long io_base;
+};
+
+struct bcm283x_pdata pdata_bcm283x[] = {
+ [PDATA_BCM2835] = {
+ .io_base = 0x20000000,
+ },
+ [PDATA_BCM2836] = {
+ .io_base = 0x3f000000,
+ },
+#ifdef CONFIG_ARM64
+ [PDATA_BCM2837] = {
+ .io_base = 0x3f000000,
+ },
+ [PDATA_BCM2838] = {
+ .io_base = 0xfe000000,
+ },
+#endif
+};
+
+/*
+ * I/O address space varies on different chip versions.
+ * We set the base address by inspecting the DTB.
+ */
+static const struct udevice_id board_ids[] = {
+ { .compatible = "brcm,bcm2835", .data = PDATA_BCM2835},
+ { .compatible = "brcm,bcm2836", .data = PDATA_BCM2836},
+ { .compatible = "brcm,bcm2837", .data = PDATA_BCM2837},
+ { .compatible = "brcm,bcm2838", .data = PDATA_BCM2838},
+ { .compatible = "brcm,bcm2711", .data = PDATA_BCM2838},
+ { },
+};
+
int arch_cpu_init(void)
{
icache_enable();
@@ -19,10 +59,28 @@ int arch_cpu_init(void)
int mach_cpu_init(void)
{
- rpi_bcm283x_base = CONFIG_BCM283x_BASE;
+ const struct udevice_id *of_match = board_ids;
+ int ret;
+
+ rpi_bcm283x_base = 0;
+
+ while (of_match->compatible) {
+ struct bcm283x_pdata pdat;
+
+ ret = fdt_node_check_compatible(gd->fdt_blob, 0,
+ of_match->compatible);
+ if (!ret) {
+ pdat = pdata_bcm283x[of_match->data];
+ rpi_bcm283x_base = pdat.io_base;
+ break;
+ }
+
+ of_match++;
+ }
return 0;
}
+
#ifdef CONFIG_ARMV7_LPAE
void enable_caches(void)
{
--
2.22.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
