On 9/29/19 8:33 PM, Jarkko Nikula wrote:
> Currently "bootcmd" does not work as intended but instead prints MMC usage
> information and goes directly to "nandboot".
>
> Follow what the commit 669681104daa ("configs: Fix usage of mmc rescan")
> does for other boards prior to support for TechNexion TAO3530 SoM was
> added.
>
> Signed-off-by: Jarkko Nikula <jarkko.nik...@bitmer.com>
> ---
> include/configs/tao3530.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
> index c34e785d9e55..5f75eed4c0e7 100644
> --- a/include/configs/tao3530.h
> +++ b/include/configs/tao3530.h
> @@ -114,7 +114,7 @@
> "bootm ${loadaddr}\0" \
>
> #define CONFIG_BOOTCOMMAND \
> - "if mmc rescan ${mmcdev}; then " \
> + "mmc dev $(mmcdev); if mmc rescan; then " \
Please discard this, by some reason I managed to put round brackets
here. Will resend.
--
Jarkko
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
