Dear all, I'm trying to get mainline U-Boot to boot on mainline QEMU 4.1.0 for the 'sabrelite' board, using the configuration 'mx6qsabrelite_defconfig'.
It's not booting at all. Actually, not a single U-Boot build for an i.MX board would boot, with the exception of 'imx25-pdk'. I'm compiling U-Boot by un-tarring the source tarball and running the following commands: $ time CROSS_COMPILE=/path/to/toolchain/arm-2014.05/bin/arm-none-linux-gnueabi- make ARCH=arm clean $ time CROSS_COMPILE=/path/to/toolchain/arm-2014.05/bin/arm-none-linux-gnueabi- make ARCH=arm mrproper $ time CROSS_COMPILE=/path/to/toolchain/arm-2014.05/bin/arm-none-linux-gnueabi- make ARCH=arm mx6qsabrelite_defconfig then after the build finishes: $ qemu-system-arm -M sabrelite -m 512M -kernel ~/Downloads/u-boot-2019.10-rc3/u-boot.imx -monitor stdio And other variations on this command as well. No amount of kernel commandline options or anything would make it boot. What should I do? Kindest regards, Waseem _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
