Hi everybody, thanks for deep analyses (I just jump at the end):
On 08/10/19 12:03, Peter Robinson wrote: >> On Thu, Sep 26, 2019 at 05:07:21PM -0300, Fabio Estevam wrote: >>> Hi Vagrant, >>> >>> On Thu, Sep 26, 2019 at 4:16 PM Vagrant Cascadian <[email protected]> >>> wrote: >>>> >>>> I just tested mx6cuboxi with 2019.10-rc4, and it fails to load >>>> u-boot.img from MMC: >>>> >>>> 1 2019-09-26_17:31:27.63089 U-Boot SPL 2019.10-rc4+dfsg-1 (Sep 24 2019 - >>>> 08:03:23 +0000) >>>> 2 2019-09-26_17:31:27.63092 Trying to boot from MMC2 >>>> 3 2019-09-26_17:31:27.63095 MMC Device 1 not found >>>> 4 2019-09-26_17:31:27.63097 spl: could not find mmc device 1. error: -19 >>>> 5 2019-09-26_17:31:27.63099 SPL: failed to boot from all boot devices >>>> 6 2019-09-26_17:31:27.63101 ### ERROR ### Please RESET the board ### >>> >>> Thanks for reporting this issue. >>> >>> Unfortunately, I don't have access to my Cuboxi, so I am adding Jon >>> and Baruch on Cc. >> >> Works after reverting the following commit. > > For reference reverting this on 2019.10 fixed my issues with the udoo_neo > board. > >> 14d319b1856b86e593e01abd0a1e3c2d63b52a8a is the first bad commit >> commit 14d319b1856b86e593e01abd0a1e3c2d63b52a8a >> Author: Adam Ford <[email protected]> >> Date: Thu May 23 14:11:30 2019 -0500 >> >> spl: imx6: Let spl_boot_device return USDHC1 or USDHC2 >> >> Currently, when the spl_boot_device checks the boot device, it >> will only return MMC1 when it's either sd or eMMC regardless >> of whether or not it's MMC1 or MMC2. This is a problem when >> booting from MMC2 if MMC isn't being manually configured like in >> the DM_SPL case with SPL_OF_CONTROL. >> >> This patch will check the register and return either MMC1 or MMC2. >> >> Signed-off-by: Adam Ford <[email protected]> >> I tend to revert the pathc and let the "standard" case working. A board maintainer coould add a board_boot_order() function to still overwrite the behavior of spl_boot_device(). Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
