Dear Tom, > From: Mans Rullgard <m...@mansr.com> > > This change allows setting pre-defined eMMC boot partition for SPL > eMMC booting. It is necessary in the case when one wants to boot > (through falcon boot) from eMMC after loading SPL from other memory > (like SPI-NOR). > > Signed-off-by: Mans Rullgard <m...@mansr.com> > [lukma: Edit the commit message] > Signed-off-by: Lukasz Majewski <lu...@denx.de> > Acked-by: Andreas Dannenberg <dannenb...@ti.com> >
Tom, are there any issues preventing this patch from being applied to
-master?
> ---
>
> common/spl/Kconfig | 6 ++++++
> common/spl/spl_mmc.c | 4 ++++
> 2 files changed, 10 insertions(+)
>
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index f467eca2be..5b7667ea16 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -314,6 +314,12 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
> Address on the MMC to load U-Boot from, when the MMC is
> being used in raw mode. Units: MMC sectors (1 sector = 512 bytes).
>
> +config SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
> + int "Number of the eMMC boot partition to use"
> + default 1
> + help
> + eMMC boot partition number to use when the eMMC in raw
> mode. +
> config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
> bool "MMC Raw mode: by partition"
> help
> diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
> index 2caceb5186..a4d2e63b82 100644
> --- a/common/spl/spl_mmc.c
> +++ b/common/spl/spl_mmc.c
> @@ -334,6 +334,9 @@ int spl_mmc_load(struct spl_image_info *spl_image,
> err = -EINVAL;
> switch (boot_mode) {
> case MMCSD_MODE_EMMCBOOT:
> +#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
> + part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION;
> +#else
> /*
> * We need to check what the partition is configured
> to.
> * 1 and 2 match up to boot0 / boot1 and 7 is user
> data @@ -343,6 +346,7 @@ int spl_mmc_load(struct spl_image_info
> *spl_image,
> if (part == 7)
> part = 0;
> +#endif
>
> if (CONFIG_IS_ENABLED(MMC_TINY))
> err = mmc_switch_part(mmc, part);
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgpMW0swLjP7F.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
