On Tue, Oct 8, 2019 at 7:50 PM Peng Fan <peng....@nxp.com> wrote: > <snip> > > > + > > > +Build U-Boot > > > +============ > > > +$ export CROSS_COMPILE=aarch64-poky-linux- $ make > > > +imx8mm_evk_defconfig $ export ATF_LOAD_ADDR=0x920000 $ make > > flash.bin > > > > Build fails due to default_serial_console undefined. Did you need to enable > > DM_SERIAL? > > Using imx/master I do not met build failure. I not enable DM_SERIAL. > > > > > After enabling DM_SERIAL build fails during image creation: > > > > MKIMAGE u-boot.itb > > ./tools/imx8m_image.sh spl/u-boot-spl.cfgout 1 > > 26061+0 records in > > 26061+0 records out > > 104244 bytes (104 kB, 102 KiB) copied, 0.0458568 s, 2.3 MB/s > > MKIMAGE flash.bin > > Not support no fit > > arch/arm/mach-imx/Makefile:151: recipe for target 'flash.bin' failed > > > > If I hack using_fit=1 into tools/imx8mimage.c I can build flash.bin but it > > does > > not boot. > > > > Am I missing some additional necessary patches to tools? > > Please try imx/master. >
Peng, Yes, imx/master is working. I guess there is something different there that's still not in mainline. I'll wait for your next series and try again. Thanks, Tim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot