Signed-off-by: Lukasz Majewski <lu...@denx.de>
---
Changes in v3: None
include/configs/kp_imx6q_tpc.h | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h
index 2435ebbc7f..fae45cbf3e 100644
--- a/include/configs/kp_imx6q_tpc.h
+++ b/include/configs/kp_imx6q_tpc.h
@@ -82,11 +82,32 @@
"rdinit=/sbin/init\0" \
"addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \
"fit_config=mx6q_tpc70_conf\0" \
+ "uboot_file=u-boot.img\0" \
+ "SPL_file=SPL\0" \
+ "wic_file=kp-image-kpimx6qtpc.wic\0" \
"upd_image=st.4k\0" \
"updargs=setenv bootargs console=${console} ${smp}"\
"rdinit=${rdinit} ${debug} ${displayargs}\0" \
"loadusb=usb start; " \
"fatload usb 0 ${loadaddr} ${upd_image}\0" \
+ "upd_uboot_sd=" \
+ "if tftp ${loadaddr} ${uboot_file}; then " \
+ "setexpr blkc ${filesize} / 0x200;" \
+ "setexpr blkc ${blkc} + 1;" \
+ "mmc write ${loadaddr} 0x8A ${blkc};" \
+ "fi;\0" \
+ "upd_SPL_sd=" \
+ "if tftp ${loadaddr} ${SPL_file}; then " \
+ "setexpr blkc ${filesize} / 0x200;" \
+ "setexpr blkc ${blkc} + 1;" \
+ "mmc write ${loadaddr} 0x2 ${blkc};" \
+ "fi;\0" \
+ "upd_wic=" \
+ "if tftp ${loadaddr} ${wic_file}; then " \
+ "setexpr blkc ${filesize} / 0x200;" \
+ "setexpr blkc ${blkc} + 1;" \
+ "mmc write ${loadaddr} 0x0 ${blkc};" \
+ "fi;\0" \
"usbupd=echo Booting update from usb ...; " \
"setenv bootargs; " \
"run updargs; " \
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
