Hi Patrick On 9/13/19 3:24 PM, Patrick Delaunay wrote: > Select the correct USB product id used by the download gadget > for ST stm32mp1 boards. > > The board stm32mp1 select the correct product id, as defined in > http://www.linux-usb.org/usb.ids for the STMicroelectronics > vendor id = 0x0483 (CONFIG_USB_GADGET_VENDOR_NUM): > - dfu = 0xdf11 : STM Device in DFU mode > it is the value used by ROM code and reused for stm32prog > command > - fasboot = 0x0afb : Android Fastboot device > - others = 0x5720 (CONFIG_USB_GADGET_PRODUCT_NUM) > Mass Storage Device > it is used for UMS command / usb_dnl_ums > > This patch avoid conflict when the same USB VID/PID is used for > ums, fastboot or dfu command (two different protocols associated > to the same PID). > > Signed-off-by: Patrick Delaunay <patrick.delau...@st.com> > --- > > board/st/stm32mp1/stm32mp1.c | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c > index 18f9b84876..126af30173 100644 > --- a/board/st/stm32mp1/stm32mp1.c > +++ b/board/st/stm32mp1/stm32mp1.c > @@ -233,6 +233,23 @@ int g_dnl_board_usb_cable_connected(void) > > return dwc2_udc_B_session_valid(dwc2_udc_otg); > } > + > +#define STM32MP1_G_DNL_DFU_PRODUCT_NUM 0xdf11 > +#define STM32MP1_G_DNL_FASTBOOT_PRODUCT_NUM 0x0afb > + > +int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) > +{ > + if (!strcmp(name, "usb_dnl_dfu")) > + put_unaligned(STM32MP1_G_DNL_DFU_PRODUCT_NUM, &dev->idProduct); > + else if (!strcmp(name, "usb_dnl_fastboot")) > + put_unaligned(STM32MP1_G_DNL_FASTBOOT_PRODUCT_NUM, > + &dev->idProduct); > + else > + put_unaligned(CONFIG_USB_GADGET_PRODUCT_NUM, &dev->idProduct); > + > + return 0; > +} > + > #endif /* CONFIG_USB_GADGET */ > > #ifdef CONFIG_LED
Acked-by: Patrice Chotard <patrice.chot...@st.com> Thanks _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot