On Thu, Sep 12, 2019 at 12:14 PM Marcel Ziswiler <mar...@ziswiler.com> wrote: > > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > Fix SPI1 and UART2/3 resp. UARTB/C pinmuxing. > > Note: The former was illegally muxing multiple SoC balls onto the same > internal SoC signal which caused rather strange behaviour regarding > the RS232 serial transceiver ForceOFF# pins as available on Iris. > > Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > --- > > .../colibri_t30/pinmux-config-colibri_t30.h | 23 ++++++++++--------- > 1 file changed, 12 insertions(+), 11 deletions(-) > > diff --git a/board/toradex/colibri_t30/pinmux-config-colibri_t30.h > b/board/toradex/colibri_t30/pinmux-config-colibri_t30.h > index 6181b506a4..c583583b3f 100644 > --- a/board/toradex/colibri_t30/pinmux-config-colibri_t30.h > +++ b/board/toradex/colibri_t30/pinmux-config-colibri_t30.h > @@ -181,13 +181,14 @@ static struct pmux_pingrp_config tegra3_pinmux_common[] > = { > LV_PINMUX(VI_D10_PT2, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), > LV_PINMUX(VI_MCLK_PT1, VI, UP, NORMAL, INPUT, DISABLE, DISABLE), > DEFAULT_PINMUX(UART2_RXD_PC3, UARTB, NORMAL, NORMAL, INPUT), > - DEFAULT_PINMUX(UART2_TXD_PC2, UARTB, NORMAL, NORMAL, OUTPUT), > - DEFAULT_PINMUX(UART2_RTS_N_PJ6, UARTB, NORMAL, NORMAL, OUTPUT), > - DEFAULT_PINMUX(UART2_CTS_N_PJ5, UARTB, NORMAL, NORMAL, INPUT), > - DEFAULT_PINMUX(UART3_TXD_PW6, UARTC, NORMAL, NORMAL, OUTPUT), > - DEFAULT_PINMUX(UART3_RXD_PW7, UARTC, NORMAL, NORMAL, INPUT), > - DEFAULT_PINMUX(UART3_CTS_N_PA1, UARTC, NORMAL, NORMAL, INPUT), > - DEFAULT_PINMUX(UART3_RTS_N_PC0, UARTC, NORMAL, NORMAL, OUTPUT), > + DEFAULT_PINMUX(UART2_TXD_PC2, UARTB, NORMAL, NORMAL, INPUT), > + DEFAULT_PINMUX(UART2_RTS_N_PJ6, GMI, NORMAL, NORMAL, INPUT), > + DEFAULT_PINMUX(UART2_CTS_N_PJ5, GMI, NORMAL, NORMAL, INPUT), > + DEFAULT_PINMUX(UART3_TXD_PW6, GMI, NORMAL, NORMAL, INPUT), > + DEFAULT_PINMUX(UART3_RXD_PW7, GMI, NORMAL, NORMAL, INPUT), > + DEFAULT_PINMUX(UART3_CTS_N_PA1, GMI, NORMAL, NORMAL, INPUT), > + DEFAULT_PINMUX(UART3_RTS_N_PC0, GMI, NORMAL, NORMAL, INPUT), > + > DEFAULT_PINMUX(PU0, RSVD1, NORMAL, NORMAL, INPUT), > DEFAULT_PINMUX(PU1, RSVD1, NORMAL, NORMAL, OUTPUT), > DEFAULT_PINMUX(PU2, RSVD1, NORMAL, NORMAL, INPUT), > @@ -270,10 +271,10 @@ static struct pmux_pingrp_config tegra3_pinmux_common[] > = { > DEFAULT_PINMUX(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, INPUT), > > DEFAULT_PINMUX(SPI2_CS1_N_PW2, SPI2, UP, NORMAL, INPUT), > - DEFAULT_PINMUX(SPI1_MOSI_PX4, SPI1, NORMAL, NORMAL, INPUT), > - DEFAULT_PINMUX(SPI1_SCK_PX5, SPI1, NORMAL, NORMAL, INPUT), > - DEFAULT_PINMUX(SPI1_CS0_N_PX6, SPI1, NORMAL, NORMAL, INPUT), > - DEFAULT_PINMUX(SPI1_MISO_PX7, SPI1, NORMAL, NORMAL, INPUT), > + DEFAULT_PINMUX(SPI1_MOSI_PX4, GMI, NORMAL, NORMAL, INPUT), > + DEFAULT_PINMUX(SPI1_SCK_PX5, GMI, NORMAL, NORMAL, INPUT), > + DEFAULT_PINMUX(SPI1_CS0_N_PX6, GMI, NORMAL, NORMAL, INPUT), > + DEFAULT_PINMUX(SPI1_MISO_PX7, RSVD4, NORMAL, NORMAL, INPUT), > > /* LAN_RESET */ > DEFAULT_PINMUX(PEX_L0_PRSNT_N_PDD0, RSVD2, NORMAL, NORMAL, OUTPUT), > -- > 2.21.0 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot
Reviewed-by: Igor Opaniuk <igor.opan...@toradex.com> -- Best regards - Freundliche GrĂ¼sse - Meilleures salutations Igor Opaniuk mailto: igor.opan...@gmail.com skype: igor.opanyuk +380 (93) 836 40 67 http://ua.linkedin.com/in/iopaniuk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot