In some cases SPL needs to be able to erase but TPL just needs to read.
Allow these to have separate settings for SPI_FLASH_TINY.
Signed-off-by: Simon Glass <s...@chromium.org>
---
common/spl/Kconfig | 10 ++++++++++
drivers/mtd/spi/Makefile | 2 +-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 86d7edfee1..604bb69d69 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1423,6 +1423,16 @@ config TPL_SPI_FLASH_SUPPORT
Enable support for using SPI flash in TPL. See SPL_SPI_FLASH_SUPPORT
for details.
+config TPL_SPI_FLASH_TINY
+ bool "Enable low footprint TPL SPI Flash support"
+ depends on TPL_SPI_FLASH_SUPPORT && !SPI_FLASH_BAR
+ default y if SPI_FLASH
+ help
+ Enable lightweight TPL SPI Flash support that supports just reading
+ data/images from flash. No support to write/erase flash. Enable
+ this if you have TPL size limitations and don't need full-fledged
+ SPI flash support.
+
config TPL_SPI_LOAD
bool "Support loading from SPI flash"
depends on TPL_SPI_FLASH_SUPPORT
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 20db1015d9..df04297671 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -8,7 +8,7 @@ spi-nor-y := sf_probe.o spi-nor-ids.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o
-ifeq ($(CONFIG_SPL_SPI_FLASH_TINY),y)
+ifeq ($(CONFIG_$(SPL_TPL_)SPI_FLASH_TINY),y)
spi-nor-y += spi-nor-tiny.o
else
spi-nor-y += spi-nor-core.o
--
2.24.0.rc0.303.g954a862665-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
