There is an option to enable the board detection for TI platforms.
If this is option is not set, there is no reason to set the EEPROM
bus address or chip address.
This patch makes both EEPROM_BUS_ADDRESS and EEPROM_CHIP_ADDRESS
depend on TI_I2C_BOARD_DETECT.
Signed-off-by: Adam Ford <aford...@gmail.com>
diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig
index b1956b8100..9ead7ca038 100644
--- a/board/ti/common/Kconfig
+++ b/board/ti/common/Kconfig
@@ -8,11 +8,13 @@ config EEPROM_BUS_ADDRESS
int "Board EEPROM's I2C bus address"
range 0 8
default 0
+ depends on TI_I2C_BOARD_DETECT
config EEPROM_CHIP_ADDRESS
hex "Board EEPROM's I2C chip address"
range 0 0xff
default 0x50
+ depends on TI_I2C_BOARD_DETECT
config TI_COMMON_CMD_OPTIONS
bool "Enable cmd options on TI platforms"
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
