Hi Michael,
> -----Original Message-----
> From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Michael Walle
> Sent: Saturday, November 2, 2019 11:56 PM
> To: u-boot@lists.denx.de
> Subject: [EXT] [U-Boot] [PATCH v2 2/2] arm: ls1028a: use the new flexspi
> driver
>
> Caution: EXT Email
>
> Also align the fspi node with the kernel one. There is actually no driver
> which
> would match "nxp,dn-fspi".
>
> Signed-off-by: Michael Walle <mich...@walle.cc>
> ---
> changes since v1:
> - none
>
> arch/arm/dts/fsl-ls1028a.dtsi | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
> index
> 43a154e8e7..774e477542 100644
> --- a/arch/arm/dts/fsl-ls1028a.dtsi
> +++ b/arch/arm/dts/fsl-ls1028a.dtsi
> @@ -49,14 +49,16 @@
> <1 10 0x8>; /* Hypervisor PPI, active-low */
> };
>
> - fspi: flexspi@20C0000 {
> - compatible = "nxp,dn-fspi";
> + fspi: flexspi@20c0000 {
> + compatible = "nxp,lx2160a-fspi";
> #address-cells = <1>;
> #size-cells = <0>;
> - reg = <0x0 0x20C0000 0x0 0x10000>,
> - <0x0 0x20000000 0x0 0x10000000>; /*64MB flash*/
> - reg-names = "FSPI", "FSPI-memory";
> - num-cs = <1>;
> + reg = <0x0 0x20c0000 0x0 0x10000>,
> + <0x0 0x20000000 0x0 0x10000000>;
> + reg-names = "fspi_base", "fspi_mmap";
> + clocks = <&clockgen 4 3>, <&clockgen 4 3>;
> + clock-names = "fspi_en", "fspi";
> + interrupts = <0 25 0x4>;
Please change the interrupts to "<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>" as it avoids
magic numbers.
Reviewed-by: Kuldeep Singh <kuldeep.si...@nxp.com>
> status = "disabled";
> };
>
> --
> 2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
