We should set the init value when vdd_log is enabled, or else the
vdd_log output voltage may not in soc required range.
Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
---
arch/arm/dts/rk3399-khadas-edge-u-boot.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/rk3399-khadas-edge-u-boot.dtsi
b/arch/arm/dts/rk3399-khadas-edge-u-boot.dtsi
index 35b9fdda77..a7039d74a0 100644
--- a/arch/arm/dts/rk3399-khadas-edge-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-khadas-edge-u-boot.dtsi
@@ -11,3 +11,7 @@
u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
};
};
+
+&vdd_log {
+ regulator-init-microvolt = <950000>;
+};
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
