Dear Timur Tabi, In message <1276547304-10105-1-git-send-email-ti...@freescale.com> you wrote: > Add basic suport for the Freescale P1022DS reference board. > > Specifics: > > 1) 36-bit only > 2) Booting from NOR flash only > 3) Environment stored in NOR flash only > 4) No SPI support ... > +int checkboard(void) > +{ > + u8 sw; > + > + puts("Board: P1022DS "); > + > + printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", > + in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); > + > + sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); > + > + switch ((sw & PIXIS_LBMAP_MASK) >> 6) { > + case 0: > + printf ("vBank: %u\n", ((sw & 0x30) >> 4)); > + break; > + case 1: > + printf ("NAND\n"); > + break; > + case 2: > + case 3: > + puts ("Promjet\n"); > + break; > + }
Incorrect indentation. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de On a clear disk you can seek forever. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot