On Sun, Nov 17, 2019 at 3:47 PM Michael Trimarchi
<mich...@amarulasolutions.com> wrote:
>
> Add a way to detect board id and pcb id.
>
> Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com>
> ---
> arch/arm/dts/rk3288-tinker.dtsi | 33 ++++++++
> board/rockchip/tinker_rk3288/tinker-rk3288.c | 83 ++++++++++++++++++++
> 2 files changed, 116 insertions(+)
>
> diff --git a/arch/arm/dts/rk3288-tinker.dtsi b/arch/arm/dts/rk3288-tinker.dtsi
> index 2f816af47f..67a0374050 100644
> --- a/arch/arm/dts/rk3288-tinker.dtsi
> +++ b/arch/arm/dts/rk3288-tinker.dtsi
> @@ -53,6 +53,21 @@
> #clock-cells = <0>;
> };
>
> + board_info: board-info {
> + tinker,pcbid0 = <&gpio2 8 GPIO_ACTIVE_HIGH>;
> + tinker,pcbid1 = <&gpio2 9 GPIO_ACTIVE_HIGH>;
> + tinker,pcbid2 = <&gpio2 10 GPIO_ACTIVE_HIGH>;
> + tinker,pid0 = <&gpio2 1 GPIO_ACTIVE_HIGH>;
> + tinker,pid1 = <&gpio2 2 GPIO_ACTIVE_HIGH>;
> + tinker,pid2 = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> + };
> +
> + board_control: board-control {
> + tinker,sdp = <&gpio6 5 GPIO_ACTIVE_HIGH>;
> + tinker,usblimit = <&gpio6 6 GPIO_ACTIVE_HIGH>;
> + tinker,maskemmc = <&gpio6 7 GPIO_ACTIVE_HIGH>;
> + };
> +
Need to move this into -u-boot.dtsi
> gpio-keys {
> compatible = "gpio-keys";
> autorepeat;
> @@ -461,6 +476,10 @@
> };
>
> &pinctrl {
> + /* Pins that are not explicitely used by any devices */
> + pinctrl-names = "default";
> + pinctrl-0 = <&tinker_pin_hog>;
> +
> pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
> drive-strength = <8>;
> };
> @@ -482,6 +501,20 @@
> };
> };
>
> + hog {
> + tinker_pin_hog: tinker-pin-hog {
> + rockchip,pins = <2 RK_PA1 RK_FUNC_GPIO
> &pcfg_pull_up>, /* project id 0 */
> + <2 RK_PA2 RK_FUNC_GPIO
> &pcfg_pull_up>, /* project id 1 */
> + <2 RK_PA3 RK_FUNC_GPIO
> &pcfg_pull_up>, /* project id 2 */
> + <2 RK_PB0 RK_FUNC_GPIO
> &pcfg_pull_none>, /* pcb id 0 */
> + <2 RK_PB1 RK_FUNC_GPIO
> &pcfg_pull_none>, /* pcb id 1 */
> + <2 RK_PB2 RK_FUNC_GPIO
> &pcfg_pull_none>, /* pcb id 2 */
> + <6 RK_PA5 RK_FUNC_GPIO
> &pcfg_pull_none>, /* sdp detect */
> + <6 RK_PA6 RK_FUNC_GPIO
> &pcfg_pull_up>, /* current limit */
> + <6 RK_PA7 RK_FUNC_GPIO
> &pcfg_pull_none>; /* emmc mask */
> + };
> + };
> +
hog node is legacy representation, so we need to have a proper node to
define these.
> eth_phy {
> eth_phy_pwr: eth-phy-pwr {
> rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
> diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c
> b/board/rockchip/tinker_rk3288/tinker-rk3288.c
> index 7a0c3c997d..7c65521f55 100644
> --- a/board/rockchip/tinker_rk3288/tinker-rk3288.c
> +++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c
> @@ -5,12 +5,26 @@
>
> #include <common.h>
> #include <dm.h>
> +#include <dm/device-internal.h>
> +#include <asm/gpio.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> #include <env.h>
> #include <i2c_eeprom.h>
> #include <netdev.h>
> #include <asm/arch-rockchip/bootrom.h>
> #include <asm/io.h>
>
> +enum project_id {
> + tinker_board_s = 0,
> + tinker_board = 7,
> +};
> +
> +enum pcb_id {
> + SR,
> + ER,
> + PR,
> +};
> +
> static int get_ethaddr_from_eeprom(u8 *addr)
> {
> int ret;
> @@ -23,10 +37,14 @@ static int get_ethaddr_from_eeprom(u8 *addr)
> return i2c_eeprom_read(dev, 0, addr, 6);
> }
>
> +int detect_board_init(void);
Mark this function as static.
> +
> int rk3288_board_late_init(void)
> {
> u8 ethaddr[6];
>
> + detect_board_init();
> +
> if (get_ethaddr_from_eeprom(ethaddr))
> return 0;
>
> @@ -45,3 +63,68 @@ int mmc_get_env_dev(void)
>
> return 1;
> }
> +
> +int detect_board_init(void)
> +{
> + int ret = 0, i;
> + ofnode node;
> + struct udevice *gpio_dev2 = NULL;
> + struct udevice *gpio_dev6 = NULL;
> + struct gpio_desc pcbid[3];
> + struct gpio_desc pid[3];
> + enum project_id prjid;
> + char gpio_name[64];
> + enum pcb_id pcbversion;
> +
> + debug("%s: detect boad\n", __func__);
> +
> + if (uclass_get_device_by_name(UCLASS_GPIO, "gpio2@ff790000",
> &gpio_dev2) ||
> + uclass_get_device_by_name(UCLASS_GPIO, "gpio6@ff7d0000",
> &gpio_dev6)) {
> + printf("Could not get GPIO device.\n");
> + return -EINVAL;
> + }
> +
> + ret = device_probe(gpio_dev2);
> + if (ret)
> + pr_err("%s - probe failed: %d\n", gpio_dev2->name, ret);
> +
> + ret = device_probe(gpio_dev6);
> + if (ret)
> + pr_err("%s - probe failed: %d\n", gpio_dev6->name, ret);
> +
> + node = ofnode_path("/board-info");
> + if (!ofnode_valid(node)) {
> + pr_err("%s: no /board-info node?\n", __func__);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < 3; i++) {
> + snprintf(gpio_name, 64, "tinker,pid%d", i);
> + if (gpio_request_by_name_nodev(node, gpio_name, 0,
> + &pid[i], GPIOD_IS_IN)) {
> + printf("Failed to request %s\n", gpio_name);
> + continue;
> + }
> + }
> +
> + for (i = 0; i < 3; i++) {
> + snprintf(gpio_name, 64, "tinker,pcbid%d", i);
> + if (gpio_request_by_name_nodev(node, gpio_name, 0,
> + &pcbid[i], GPIOD_IS_IN)) {
> + printf("Failed to request %s\n", gpio_name);
> + continue;
> + }
> + }
> +
> + prjid = dm_gpio_get_value(&pid[0]) | \
> + dm_gpio_get_value(&pid[1]) << 1 | \
> + dm_gpio_get_value(&pid[2]) << 2;
> + pcbversion = dm_gpio_get_value(&pcbid[0]) | \
> + dm_gpio_get_value(&pcbid[1]) << 1 | \
> + dm_gpio_get_value(&pcbid[2]) << 2;
> +
> + printf("Detect %s rev %d\n",
> + prjid == tinker_board ? "Tinker" : "Tinker S", pcbversion);
I can see the output on my tinker as
Detect Tinker rev 2
But the back side of PCB show REV 1.2 any clue?
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
