Hey Ondřej,
On 22/11/2019 15:23, Ondřej Jirman wrote:
Hello,
On Fri, Nov 22, 2019 at 02:04:00PM +0100, Andre Heider wrote:
The BCM4345C5 of the Orange Pi 3 ships with the controller default
address. Fix it up so it can function properly.
This is very nice!
The used address is "ethaddr" with the LSB flipped.
Signed-off-by: Andre Heider <a.hei...@gmail.com>
---
NOTE:
"local-bd-address" is a universal property, the kernel patch for
btbcm to use that is in bluetooth-next.
board/sunxi/board.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index bb35d6b66e..2897bf45e1 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -856,6 +856,32 @@ int misc_init_r(void)
return 0;
}
+static void fixup_bd_address(void *blob)
+{
+#if defined(CONFIG_MACH_SUN50I_H6)
This sounds useful for other sunxi boards too (many ship with broadcom
BT chips with unassigned addresses), can we have a generic config for
the fixup?
Something like CONFIG_SUNXI_BTADDR_FIXUP that can be enabled in defconfig
files, or pre-selected/implied by CONFIG_MACH_SUN* that may want it on
by default?
sure, we can do that, but note there's "brcm,bcm4345c5" used below,
hence me limiting it to opi3 for now.
So we either need to have something like
CONFIG_SUNXI_BTADDR_FIXUP="brcm,bcm4345c5"
or a dts "bluetooth" alias we can refer to.
I'd go for the former, would that be an acceptable solution?
Thanks,
Andre
+ /* Some devices ship with the controller default address.
+ * Set a valid address through the device tree.
+ */
+ uchar mac[ETH_ALEN], bdaddr[ETH_ALEN];
+ int i;
+
+ if (!of_machine_is_compatible("xunlong,orangepi-3"))
+ return;
You don't need to limit this to opi3 only.
thank you and regards,
o.
+
+ if (!eth_env_get_enetaddr("ethaddr", mac))
+ return;
+
+ /* Addresses need to be in the binary format of the corresponding stack
*/
+ for (i = 0; i < ETH_ALEN; ++i)
+ bdaddr[i] = mac[ETH_ALEN - i - 1];
+
+ bdaddr[0] ^= 1;
+
+ do_fixup_by_compat(blob, "brcm,bcm4345c5",
+ "local-bd-address", bdaddr, ETH_ALEN, 1);
+#endif
+}
+
int ft_board_setup(void *blob, bd_t *bd)
{
int __maybe_unused r;
@@ -866,6 +892,8 @@ int ft_board_setup(void *blob, bd_t *bd)
*/
setup_environment(blob);
+ fixup_bd_address(blob);
+
#ifdef CONFIG_VIDEO_DT_SIMPLEFB
r = sunxi_simplefb_setup(blob);
if (r)
--
2.24.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
