[PATCH 2/3] spi: cadence-qspi: Add support for Cadence Octal SPI controller

[Vignesh Raghavendra]

Cadence OSPI is similar to QSPI IP except that it supports Octal IO
(8 IO lines) flashes. Add support for Cadence OSPI IP with existing
driver using new compatible

Signed-off-by: Vignesh Raghavendra <vigne...@ti.com>
---
 drivers/spi/cadence_qspi.c     | 1 +
 drivers/spi/cadence_qspi_apb.c | 8 ++++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 619fff70de2f..6374d3976a4a 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -6,6 +6,7 @@
 
 #include <common.h>
 #include <clk.h>
+#include <asm-generic/io.h>
 #include <dm.h>
 #include <fdtdec.h>
 #include <malloc.h>
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index a0e14f93e020..0a5af0561430 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -43,6 +43,7 @@
 #define CQSPI_INST_TYPE_SINGLE                 0
 #define CQSPI_INST_TYPE_DUAL                   1
 #define CQSPI_INST_TYPE_QUAD                   2
+#define CQSPI_INST_TYPE_OCTAL                  3
 
 #define CQSPI_STIG_DATA_LEN_MAX                        8
 
@@ -537,7 +538,10 @@ int cadence_qspi_apb_read_setup(struct 
cadence_spi_platdata *plat,
        /* Configure the opcode */
        rd_reg = op->cmd.opcode << CQSPI_REG_RD_INSTR_OPCODE_LSB;
 
-       if (op->data.buswidth == 4)
+       if (op->data.buswidth == 8)
+               /* Instruction and address at DQ0, data at DQ0-7. */
+               rd_reg |= CQSPI_INST_TYPE_OCTAL << 
CQSPI_REG_RD_INSTR_TYPE_DATA_LSB;
+       else if (op->data.buswidth == 4)
                /* Instruction and address at DQ0, data at DQ0-3. */
                rd_reg |= CQSPI_INST_TYPE_QUAD << 
CQSPI_REG_RD_INSTR_TYPE_DATA_LSB;
 
@@ -653,7 +657,7 @@ failrd:
 int cadence_qspi_apb_read_execute(struct cadence_spi_platdata *plat,
                                  const struct spi_mem_op *op)
 {
-       u32 from = op->addr.val;
+       u64 from = op->addr.val;
        void *buf = op->data.buf.in;
        size_t len = op->data.nbytes;
 
-- 
2.24.0