Using this define, a board can define an opimized RFDC value and use
the auto calibration code to "tune" the remaining DDR2 controller
calibration register.
Signed-off-by: Stefan Roese <s...@denx.de>
---
arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
index 0f69ef9..5e35c61 100644
--- a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+++ b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
@@ -767,6 +767,13 @@ static u32 DQS_calibration_methodB(struct ddrautocal *cal)
debug("\n\n");
+#if defined(CONFIG_DDR_RFDC_FIXED)
+ mtsdram(SDRAM_RFDC, CONFIG_DDR_RFDC_FIXED);
+ size = 512;
+ rffd_average = CONFIG_DDR_RFDC_FIXED & SDRAM_RFDC_RFFD_MASK;
+ mfsdram(SDRAM_RDCC, rdcc); /* record this value */
+ cal->rdcc = rdcc;
+#else
in_window = 0;
rdcc = 0;
@@ -830,6 +837,7 @@ static u32 DQS_calibration_methodB(struct ddrautocal *cal)
rffd_average = SDRAM_RFDC_RFFD_MAX;
mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+#endif
rffd = rffd_average;
in_window = 0;
@@ -1211,10 +1219,14 @@ u32 DQS_autocalibration(void)
debug("*** best_result: read value SDRAM_RQDC 0x%08x\n",
rqdc_reg);
+#if defined(CONFIG_DDR_RFDC_FIXED)
+ mtsdram(SDRAM_RFDC, CONFIG_DDR_RFDC_FIXED);
+#else
mfsdram(SDRAM_RFDC, rfdc_reg);
rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
mtsdram(SDRAM_RFDC, rfdc_reg |
SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd));
+#endif
mfsdram(SDRAM_RFDC, rfdc_reg);
debug("*** best_result: read value SDRAM_RFDC 0x%08x\n",
--
1.7.1.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
