[PATCH v6 059/102] x86: Don't repeat microcode in U-Boot if not needed

[Simon Glass]

At present if SPL sets up the microcode then it is still included in
U-Boot as well. This is wasteful as microcode is large. Adjust the logic
in the image to prevent this.

Reviewed-by: Bin Meng <bmeng...@gmail.com>
Signed-off-by: Simon Glass <s...@chromium.org>
---

Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/x86/dts/u-boot.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi
index 5ebff4f407..e0cca58640 100644
--- a/arch/x86/dts/u-boot.dtsi
+++ b/arch/x86/dts/u-boot.dtsi
@@ -63,9 +63,16 @@
                offset = <CONFIG_X86_OFFSET_U_BOOT>;
        };
 #else
+# ifdef CONFIG_SPL
+       u-boot {
+               offset = <CONFIG_SYS_TEXT_BASE>;
+       };
+# else
+       /* If there is no SPL then we need to put microcode in U-Boot */
        u-boot-with-ucode-ptr {
                offset = <CONFIG_X86_OFFSET_U_BOOT>;
        };
+# endif
 #endif
 #ifdef CONFIG_HAVE_MICROCODE
        u-boot-dtb-with-ucode {
-- 
2.24.0.393.g34dc348eaf-goog