Hi Tom, On Wed, Dec 4, 2019 at 11:26 PM Tom Rini <tr...@konsulko.com> wrote: > > On Fri, Nov 29, 2019 at 12:06:33PM +0100, Belisko Marek wrote: > > > Hi, > > > > I'm trying to run mainline u-boot on amlogic a96mini device but before > > I try to flash it does anybody have an idea if it will work on > > mainline. As I have limited number of devices and I know that after > > flashing I can brick the board so would like to ask if anybody have > > experience with this device and running mainline. Thanks and BR, > > I would strongly recommend making > https://github.com/superna9999/linux/wiki/Amlogic-HDMI-Boot-Dongle as a > back-up. While I have before managed to interrupt a re-flash cycle such > that the DTB on-board is still there and so the binary portions of the > firmware are happy it will then load U-Boot from SD card. I did not > play with mainline however. OK thanks for hint. IIRC this hdmi thingy tells FW from which media to boot and then I can compile u-boot and have boot it from SDcard? For me any amlogic u-boot is fine just need to be sure it will boot from emmc in final step then :). Thanks. > > -- > Tom
BR, marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com