On 2010/07/20 9:58 AM, Stefan Roese wrote: > Hi Rogan, > > OK, so the width is definitely 8 bit and not 16 bit: > > static struct physmap_flash_data dns323_nor_flash_data = { > .width = 1, > ... > > But the base address is listed here as 0xf4000000: > > #define DNS323_NOR_BOOT_BASE 0xf4000000
Hmmm, maybe I must try changing that, then. That might be the answer to all the confusion. Although it is definitely an 8MB flash, and I thought it was supposed to be at the end of memory? > Are you sure you got this right? Nevertheless, now we know for sure, that the > NOR chip is connected as an 8bit device and the chip is operated in byte mode. > So all tests from the U-Boot prompt should be done with ".b" extension. > > BTW: This code you referenced is also available in mainline kernel.org. Yes, I eventually got my "git clone" finished. Thanks again for your help! Rogan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot