On Tue, Dec 10, 2019 at 9:13 PM Fabio Estevam <feste...@gmail.com> wrote: > > Hi Peng, > > On Wed, Dec 11, 2019 at 12:05 AM Peng Fan <peng....@nxp.com> wrote: > > > > Does it work if you follow the README steps? > > > > I not download that, just use my local ATF/DDR, > > Yes, this is what I suspected: the ATF/DDR firmware versions from the > README are not working with mainline U-Boot. > > Could you please update the README to point to the correct versions, please?
For what it's worth, I went to use the firmware from 7.9 as stated in part of the readme (since the README states both 8.0 and 7.9), and I used the ATF from 4.19.35_1.1.0, and it booted once I commented out the sdhc2 cd-gpio lines. It seems like 8.0 doesn't work quite right. I am not sure why the GPIO for card detect isn't working for me. I get an error -123 (ENOMEDIUM). I tried enabling SPL_DM_GPIO without any success, so i just disabled the cd pin, and it boots now. adam > > Otherwise nobody will be able to run U-Boot mainline on i.MX8MM/i.MX8MQ. > > Thanks