Hi Simon, Bin, > +static int intel_gpio_direction_output(struct udevice *dev, uint offset, > + int value) > +{ > + struct udevice *pinctrl = dev_get_parent(dev); > + uint config_offset = intel_pinctrl_get_config_reg_addr(pinctrl, offset); > + > + pcr_clrsetbits32(dev, config_offset,
I think we should pass 'pinctrl' instead of 'dev' here. As far as I understand the code the function pcr_clrsetbits32 expects a pinctrl device with a p2sb parent. > + PAD_CFG0_MODE_MASK | PAD_CFG0_RX_STATE | > + PAD_CFG0_TX_DISABLE, We also need to clear the bit PAD_CFG0_TX_STATE here. Otherwise if a gpio is set to high once it can never be set to low again. > + PAD_CFG0_MODE_GPIO | PAD_CFG0_RX_DISABLE | > + (value ? PAD_CFG0_TX_STATE : 0)); > + > + return 0; > +} regards, Wolfgang