Hi Oliver, Fabio, Peng, On Thu, Dec 12, 2019 at 9:20 AM Oliver Graute <oliver.gra...@kococonnector.com> wrote: > > On 11/12/19, Fabio Estevam wrote: > > Hi Oliver, > > > > On Tue, Dec 10, 2019 at 11:50 PM Peng Fan <peng....@nxp.com> wrote: > > > > > Update your scfw/atf and they try again. > > > > Does it boot if you use the imx_4.19.35_1.0.0 ATF branch? > > Unfortunately, not. I checked out imx-atf in that branch. Build it with: > > make PLAT=imx8qm bl31 > > copied the resulting bl31.bin into my u-boot folder and rebuild that. > > But the imx8qm board is not booting with the resulting u-boot. > > do I need a new scfw from my vendor? > > Best Regards, > > Oliver
FYI, I do face the same boot issues on colibri-imx8qxp_defconfig , In my case using imx_4.19.35_1.0.0 TF-A(ATF) doesn't help too. Bi-secting also points to this commit. -- Best regards - Freundliche GrĂ¼sse - Meilleures salutations Igor Opaniuk mailto: igor.opan...@gmail.com skype: igor.opanyuk +380 (93) 836 40 67 http://ua.linkedin.com/in/iopaniuk