On 2019-11-14, Peter Robinson wrote: > Add initial support for Pinebook Pro laptop. > > Specification > - Rockchip RK3399 > - 4GB Dual-Channel LPDDR4 > - SD card slot > - eMMC socket > - 128Mb SPI Flash > - PCIe 4X slot > - AP6256 for WiFi + BT > - 1920*1080 screen > - USB 3.0, 2.0 > - USB Type C power and data > - DC 12V/2A
5V/3A, as already mentioned. > Signed-off-by: Peter Robinson <pbrobin...@gmail.com> > --- > > Initial v1 for feedback Tested on u-boot v2020.01-rc5; applied with trivial adjustments. Thanks for working on it! Tested-by: Vagrant Cascadian <vagr...@debian.org> live well, vagrant > U-Boot TPL 2020.01-rc2-00005-g7d87be0ff5 (Nov 14 2019 - 00:27:33) > Trying to boot from BOOTROM > Returning to boot ROM... > > U-Boot SPL 2020.01-rc2-00005-g7d87be0ff5 (Nov 14 2019 - 00:27:33 +0000) > Trying to boot from MMC1 > > > U-Boot 2020.01-rc2-00005-g7d87be0ff5 (Nov 14 2019 - 00:27:33 +0000) > > Model: Pine64 Pinebook Pro > DRAM: 3.9 GiB > PMIC: RK808 > MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0 > In: serial@ff1a0000 > Out: serial@ff1a0000 > Err: serial@ff1a0000 > Model: Pine64 Pinebook Pro > ## Error: Can't overwrite "serial#" > ## Error inserting "serial#" variable, errno=1 > rockchip_dnl_key_pressed: adc_channel_single_shot fail! > Net: No ethernet found. > Hit any key to stop autoboot: 0 > => > > > arch/arm/dts/Makefile | 1 + > arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi | 25 + > arch/arm/dts/rk3399-pinebook-pro.dts | 631 ++++++++++++++++++ > arch/arm/mach-rockchip/rk3399/Kconfig | 8 + > board/pine64/pinebook_pro_rk3399/Kconfig | 15 + > board/pine64/pinebook_pro_rk3399/MAINTAINERS | 8 + > board/pine64/pinebook_pro_rk3399/Makefile | 1 + > .../pinebook_pro_rk3399/pinebook-pro-rk3399.c | 192 ++++++ > configs/pinebook_pro-rk3399_defconfig | 76 +++ > include/configs/pinebook_pro_rk3399.h | 29 + > 10 files changed, 986 insertions(+) > create mode 100644 arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi > create mode 100644 arch/arm/dts/rk3399-pinebook-pro.dts > create mode 100644 board/pine64/pinebook_pro_rk3399/Kconfig > create mode 100644 board/pine64/pinebook_pro_rk3399/MAINTAINERS > create mode 100644 board/pine64/pinebook_pro_rk3399/Makefile > create mode 100644 board/pine64/pinebook_pro_rk3399/pinebook-pro-rk3399.c > create mode 100644 configs/pinebook_pro-rk3399_defconfig > create mode 100644 include/configs/pinebook_pro_rk3399.h > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 5a64fcc5a7..affedfd666 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -116,6 +116,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ > rk3399-nanopi-m4.dtb \ > rk3399-nanopi-neo4.dtb \ > rk3399-orangepi.dtb \ > + rk3399-pinebook-pro.dtb \ > rk3399-puma-ddr1333.dtb \ > rk3399-puma-ddr1600.dtb \ > rk3399-puma-ddr1866.dtb \ > diff --git a/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi > b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi > new file mode 100644 > index 0000000000..9b0cb7010f > --- /dev/null > +++ b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi > @@ -0,0 +1,25 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2019 Peter Robinson <pbrobinson at gmail.com> > + */ > + > +#include "rk3399-u-boot.dtsi" > +#include "rk3399-sdram-lpddr4-100.dtsi" > + > +/ { > + chosen { > + u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc; > + }; > +}; > + > +&pmugrf { > + u-boot,dm-pre-reloc; > +}; > + > +&spiflash { > + u-boot,dm-pre-reloc; > +}; > + > +&uart2 { > + u-boot,dm-pre-reloc; > +}; > diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts > b/arch/arm/dts/rk3399-pinebook-pro.dts > new file mode 100644 > index 0000000000..85ce0206d7 > --- /dev/null > +++ b/arch/arm/dts/rk3399-pinebook-pro.dts > @@ -0,0 +1,631 @@ > +/* > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +/dts-v1/; > +#include <dt-bindings/input/linux-event-codes.h> > +#include <dt-bindings/pwm/pwm.h> > +#include <dt-bindings/pinctrl/rockchip.h> > +#include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > + > +/ { > + model = "Pine64 Pinebook Pro"; > + compatible = "pine64,pinebook-pro", "rockchip,rk3399"; > + > + chosen { > + stdout-path = &uart2; > + }; > + > + aliases { > + spi0 = &spi1; > + }; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; > + pwms = <&pwm0 0 740740 0>; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + autorepeat; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwrbtn>; > + > + power { > + debounce-interval = <100>; > + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > + label = "GPIO Key Power"; > + linux,code = <KEY_POWER>; > + wakeup-source; > + }; > + }; > + > + leds { > + status = "okay"; > + compatible = "gpio-leds"; > + > + work-led { > + label = "work"; > + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > + }; > + > + standby-led { > + label = "standby"; > + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rk808 1>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_enable_h>; > + > + /* > + * On the module itself this is one of these (depending > + * on the actual card populated): > + * - SDIO_RESET_L_WL_REG_ON > + * - PDN (power down when low) > + */ > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > + }; > + > + /* switched by pmic_sleep */ > + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc1v8_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc_1v8>; > + }; > + > + dc_12v: dc-12v { > + compatible = "regulator-fixed"; > + regulator-name = "dc_12v"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + vcc3v3_sys: vcc3v3-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc_sys>; > + }; > + > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&host_vbus_drv>; > + regulator-name = "vcc5v0_host"; > + }; > + > + vcc5v0_usb3_host: vcc5v0-usb3-host-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&host_usb3_drv>; > + regulator-name = "vcc5v0_usb3_host"; > + regulator-always-on; > + }; > + > + vcc_sys: vcc-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&dc_12v>; > + }; > + > + vdd_log: vdd-log { > + compatible = "pwm-regulator"; > + pwms = <&pwm2 0 25000 1>; > + pwm-supply = <&vcc_sys>; > + regulator-name = "vdd_log"; > + regulator-always-on; > + regulator-boot-on; > + regulator-init-microvolt = <950000>; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + }; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&emmc_phy { > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <168>; > + i2c-scl-falling-time-ns = <4>; > + status = "okay"; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + reg = <0x1b>; > + interrupt-parent = <&gpio1>; > + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <1>; > + clock-output-names = "xin32k", "rk808-clkout2"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>; > + rockchip,system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc_sys>; > + vcc2-supply = <&vcc_sys>; > + vcc3-supply = <&vcc_sys>; > + vcc4-supply = <&vcc_sys>; > + vcc6-supply = <&vcc_sys>; > + vcc7-supply = <&vcc_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc_sys>; > + vcc10-supply = <&vcc_sys>; > + vcc11-supply = <&vcc_sys>; > + vcc12-supply = <&vcc3v3_sys>; > + vddio-supply = <&vcc_1v8>; > + > + regulators { > + vdd_center: DCDC_REG1 { > + regulator-name = "vdd_center"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_l: DCDC_REG2 { > + regulator-name = "vdd_cpu_l"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_1v8: DCDC_REG4 { > + regulator-name = "vcc_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc1v8_dvp: LDO_REG1 { > + regulator-name = "vcc1v8_dvp"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v0_touch: LDO_REG2 { > + regulator-name = "vcc3v0_touch"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcc1v8_pmu: LDO_REG3 { > + regulator-name = "vcc1v8_pmu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc_sdio: LDO_REG4 { > + regulator-name = "vcc_sdio"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcca3v0_codec: LDO_REG5 { > + regulator-name = "vcca3v0_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v5: LDO_REG6 { > + regulator-name = "vcc_1v5"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1500000>; > + }; > + }; > + > + vcca1v8_codec: LDO_REG7 { > + regulator-name = "vcca1v8_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v0: LDO_REG8 { > + regulator-name = "vcc_3v0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcc3v3_s3: SWITCH_REG1 { > + regulator-name = "vcc3v3_s3"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_s0: SWITCH_REG2 { > + regulator-name = "vcc3v3_s0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > + > + vdd_cpu_b: regulator@40 { > + compatible = "silergy,syr827"; > + reg = <0x40>; > + fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vsel1_gpio>; > + vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; > + regulator-compatible = "fan53555-reg"; > + regulator-name = "vdd_cpu_b"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: regulator@41 { > + compatible = "silergy,syr828"; > + reg = <0x41>; > + fcs,suspend-voltage-selector = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vsel2_gpio>; > + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; > + regulator-compatible = "fan53555-reg"; > + regulator-name = "vdd_gpu"; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1500000>; > + regulator-ramp-delay = <1000>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > +}; > + > +&i2c4 { > + i2c-scl-rising-time-ns = <600>; > + i2c-scl-falling-time-ns = <20>; > + status = "okay"; > + > + fusb0: typec-portc@22 { > + compatible = "fcs,fusb302"; > + reg = <0x22>; > + interrupt-parent = <&gpio1>; > + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&fusb0_int>; > + vbus-supply = <&vcc5v0_usb3_host>; > + status = "okay"; > + }; > +}; > + > +&io_domains { > + status = "okay"; > + > + bt656-supply = <&vcc1v8_dvp>; > + audio-supply = <&vcca1v8_codec>; > + sdmmc-supply = <&vcc_sdio>; > + gpio1830-supply = <&vcc_3v0>; > +}; > + > +&pmu_io_domains { > + pmu1830-supply = <&vcc_3v0>; > + status = "okay"; > +}; > + > +&pinctrl { > + buttons { > + pwrbtn: pwrbtn { > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + fusb302x { > + fusb0_int: fusb0-int { > + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + pmic { > + pmic_int_l: pmic-int-l { > + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + vsel1_gpio: vsel1-gpio { > + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + vsel2_gpio: vsel2-gpio { > + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + }; > + > + sdio-pwrseq { > + wifi_enable_h: wifi-enable-h { > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + usb-typec { > + vcc5v0_typec_en: vcc5v0_typec_en { > + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + usb2 { > + vcc5v0_host_en: vcc5v0-host-en { > + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + host_vbus_drv: host-vbus-drv { > + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + host_usb3_drv: host-usb3-drv { > + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&pwm1 { > + status = "okay"; > +}; > + > +&pwm2 { > + status = "okay"; > +}; > + > +&saradc { > + status = "okay"; > +}; > + > +&sdmmc { > + bus-width = <4>; > + status = "okay"; > + max-frequency = <20000000>; > +}; > + > +&sdhci { > + bus-width = <8>; > + max-frequency = <25000000>; > + mmc-hs400-1_8v; > + mmc-hs400-enhanced-strobe; > + non-removable; > + status = "okay"; > +}; > + > +&tcphy0 { > + status = "okay"; > +}; > + > +&tcphy1 { > + status = "okay"; > +}; > + > +&tsadc { > + /* tshut mode 0:CRU 1:GPIO */ > + rockchip,hw-tshut-mode = <1>; > + /* tshut polarity 0:LOW 1:HIGH */ > + rockchip,hw-tshut-polarity = <1>; > + status = "okay"; > +}; > + > +&u2phy0 { > + status = "okay"; > + > + u2phy0_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy0_host: host-port { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > + }; > +}; > + > +&u2phy1 { > + status = "okay"; > + > + u2phy1_otg: otg-port { > + status = "okay"; > + }; > + > + u2phy1_host: host-port { > + phy-supply = <&vcc5v0_host>; > + status = "okay"; > + }; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&usb_host0_ehci { > + status = "okay"; > +}; > + > +&usb_host0_ohci { > + status = "okay"; > +}; > + > +&usb_host1_ehci { > + status = "okay"; > +}; > + > +&usb_host1_ohci { > + status = "okay"; > +}; > + > +&usbdrd3_0 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_0 { > + status = "okay"; > + dr_mode = "otg"; > +}; > + > +&usbdrd3_1 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3_1 { > + status = "okay"; > + dr_mode = "host"; > +}; > + > +&spi1 { > + status = "okay"; > + > + spiflash: spi-flash@0 { > + #address-cells = <0x1>; > + #size-cells = <1>; > + compatible = "jedec,spi-nor"; > + reg = <0x0>; > + spi-max-frequency = <10000000>; > + status = "okay"; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + loader@8000 { > + label = "loader"; > + reg = <0x0 0x3F8000>; > + }; > + > + env@3f8000 { > + label = "env"; > + reg = <0x3F8000 0x8000>; > + }; > + > + vendor@7c0000 { > + label = "vendor"; > + reg = <0x7C0000 0x40000>; > + }; > + }; > + }; > +}; > diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig > b/arch/arm/mach-rockchip/rk3399/Kconfig > index f781eacd16..f694ce0119 100644 > --- a/arch/arm/mach-rockchip/rk3399/Kconfig > +++ b/arch/arm/mach-rockchip/rk3399/Kconfig > @@ -10,6 +10,13 @@ config TARGET_EVB_RK3399 > with full function and phisical connectors support like type-C ports, > usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial... > > +config TARGET_PINEBOOK_PRO_RK3399 > + bool "Pinebook Pro" > + help > + Pinebook Pro is a laptop based on the Rockchip rk3399 SoC > + with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port, > + 1920*1080 screen and all the usual laptop features. > + > config TARGET_PUMA_RK3399 > bool "Theobroma Systems RK3399-Q7 (Puma)" > help > @@ -94,6 +101,7 @@ config TPL_TEXT_BASE > config SPL_STACK_R_ADDR > default 0x04000000 > > +source "board/pine64/pinebook_pro_rk3399/Kconfig" > source "board/rockchip/evb_rk3399/Kconfig" > source "board/theobroma-systems/puma_rk3399/Kconfig" > source "board/vamrs/rock960_rk3399/Kconfig" > diff --git a/board/pine64/pinebook_pro_rk3399/Kconfig > b/board/pine64/pinebook_pro_rk3399/Kconfig > new file mode 100644 > index 0000000000..c37c643d6f > --- /dev/null > +++ b/board/pine64/pinebook_pro_rk3399/Kconfig > @@ -0,0 +1,15 @@ > +if TARGET_PINEBOOK_PRO_RK3399 > + > +config SYS_BOARD > + default "pinebook_pro_rk3399" > + > +config SYS_VENDOR > + default "pine64" > + > +config SYS_CONFIG_NAME > + default "pinebook_pro_rk3399" > + > +config BOARD_SPECIFIC_OPTIONS > + def_bool y > + > +endif > diff --git a/board/pine64/pinebook_pro_rk3399/MAINTAINERS > b/board/pine64/pinebook_pro_rk3399/MAINTAINERS > new file mode 100644 > index 0000000000..58400ebd28 > --- /dev/null > +++ b/board/pine64/pinebook_pro_rk3399/MAINTAINERS > @@ -0,0 +1,8 @@ > +PINEBOOK_PRO > +M: Peter Robinson <pbrobinson at gmail.com> > +S: Maintained > +F: board/pine64/pinebook_pro_rk3399/ > +F: include/configs/pinebook_pro_rk3399.h > +F: arch/arm/dts/rk3399-pinebook-pro.dts > +F: arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi > +F: configs/pinebook_pro-rk3399_defconfig > diff --git a/board/pine64/pinebook_pro_rk3399/Makefile > b/board/pine64/pinebook_pro_rk3399/Makefile > new file mode 100644 > index 0000000000..2f692a12a6 > --- /dev/null > +++ b/board/pine64/pinebook_pro_rk3399/Makefile > @@ -0,0 +1 @@ > +obj-y += pinebook-pro-rk3399.o > diff --git a/board/pine64/pinebook_pro_rk3399/pinebook-pro-rk3399.c > b/board/pine64/pinebook_pro_rk3399/pinebook-pro-rk3399.c > new file mode 100644 > index 0000000000..b1a2ed3b77 > --- /dev/null > +++ b/board/pine64/pinebook_pro_rk3399/pinebook-pro-rk3399.c > @@ -0,0 +1,192 @@ > +/* > + * (C) Copyright 2016 Rockchip Electronics Co., Ltd > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > +#include <common.h> > +#include <dm.h> > +#include <misc.h> > +#include <syscon.h> > +#include <dm/pinctrl.h> > +#include <dm/uclass-internal.h> > +#include <asm/io.h> > +#include <asm/setup.h> > +#include <asm/arch-rockchip/clock.h> > +#include <asm/arch-rockchip/grf_rk3399.h> > +#include <asm/arch-rockchip/hardware.h> > +#include <asm/arch-rockchip/misc.h> > +#include <asm/arch-rockchip/periph.h> > +#include <power/regulator.h> > +#include <usb.h> > +#include <dwc3-uboot.h> > + > +#define RK3399_CPUID_OFF 0x7 > +#define RK3399_CPUID_LEN 0x10 > + > +static int fix_lcd_backling_pull_mode(void) > +{ > +#include <asm/arch-rockchip/grf_rk3399.h> > + > +#define PMU_GRF_BASE 0xff320000 > + > + // set pull of GPIO1_A0 > + struct rk3399_pmugrf_regs * const pmugrf = (void *)PMU_GRF_BASE; > + rk_clrsetreg(&pmugrf->gpio1_p[0], 3 << (2 * 0), 0 << (2 * 0)); > + return 0; > +} > + > +#ifndef CONFIG_SPL_BUILD > +int board_early_init_f(void) > +{ > + struct udevice *regulator; > + int ret; > + > + ret = regulator_get_by_platname("vcc5v0_host", ®ulator); > + if (ret) { > + debug("%s vcc5v0_host init fail! ret %d\n", __func__, ret); > + goto out; > + } > + > + ret = regulator_set_enable(regulator, true); > + if (ret) > + debug("%s vcc5v0-host-en set fail! ret %d\n", __func__, ret); > + > + fix_lcd_backling_pull_mode(); > + > +out: > + return 0; > +} > +#endif > + > +static void setup_serial(void) > +{ > +#if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE) > + struct udevice *dev; > + int ret, i; > + u8 cpuid[RK3399_CPUID_LEN]; > + u8 low[RK3399_CPUID_LEN/2], high[RK3399_CPUID_LEN/2]; > + char cpuid_str[RK3399_CPUID_LEN * 2 + 1]; > + u64 serialno; > + char serialno_str[16]; > + > + /* retrieve the device */ > + ret = uclass_get_device_by_driver(UCLASS_MISC, > + DM_GET_DRIVER(rockchip_efuse), &dev); > + if (ret) { > + debug("%s: could not find efuse device\n", __func__); > + return; > + } > + > + /* read the cpu_id range from the efuses */ > + ret = misc_read(dev, RK3399_CPUID_OFF, &cpuid, sizeof(cpuid)); > + if (ret) { > + debug("%s: reading cpuid from the efuses failed\n", > + __func__); > + return; > + } > + > + memset(cpuid_str, 0, sizeof(cpuid_str)); > + for (i = 0; i < 16; i++) > + sprintf(&cpuid_str[i * 2], "%02x", cpuid[i]); > + > + debug("cpuid: %s\n", cpuid_str); > + > + /* > + * Mix the cpuid bytes using the same rules as in > + * ${linux}/drivers/soc/rockchip/rockchip-cpuinfo.c > + */ > + for (i = 0; i < 8; i++) { > + low[i] = cpuid[1 + (i << 1)]; > + high[i] = cpuid[i << 1]; > + } > + > + serialno = crc32_no_comp(0, low, 8); > + serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32; > + snprintf(serialno_str, sizeof(serialno_str), "%llx", serialno); > + > + env_set("cpuid#", cpuid_str); > + env_set("serial#", serialno_str); > +#endif > + > + return; > +} > + > +#define GRF_IO_VSEL_BT565_SHIFT 0 > +#define PMUGRF_CON0_VSEL_SHIFT 8 > + > +#ifdef CONFIG_MISC_INIT_R > +static void setup_iodomain(void) > +{ > + struct rk3399_grf_regs *grf = > + syscon_get_first_range(ROCKCHIP_SYSCON_GRF); > + struct rk3399_pmugrf_regs *pmugrf = > + syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); > + > + /* BT565 is in 1.8v domain */ > + rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT); > + > + /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */ > + rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT); > +} > + > +int misc_init_r(void) > +{ > + const u32 cpuid_offset = 0x7; > + const u32 cpuid_length = 0x10; > + u8 cpuid[cpuid_length]; > + int ret; > + > + setup_iodomain(); > + > + ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid); > + if (ret) > + return ret; > + > + ret = rockchip_cpuid_set(cpuid, cpuid_length); > + if (ret) > + return ret; > + > + ret = rockchip_setup_macaddr(); > + > + setup_serial(); > + > + return ret; > +} > +#endif > + > +#ifdef CONFIG_SERIAL_TAG > +void get_board_serial(struct tag_serialnr *serialnr) > +{ > + char *serial_string; > + u64 serial = 0; > + > + serial_string = env_get("serial#"); > + > + if (serial_string) > + serial = simple_strtoull(serial_string, NULL, 16); > + > + serialnr->high = (u32)(serial >> 32); > + serialnr->low = (u32)(serial & 0xffffffff); > +} > +#endif > + > +#ifdef CONFIG_USB_DWC3 > +static struct dwc3_device dwc3_device_data = { > + .maximum_speed = USB_SPEED_HIGH, > + .base = 0xfe800000, > + .dr_mode = USB_DR_MODE_PERIPHERAL, > + .index = 0, > + .dis_u2_susphy_quirk = 1, > +}; > + > +int usb_gadget_handle_interrupts(void) > +{ > + dwc3_uboot_handle_interrupt(0); > + return 0; > +} > + > +int board_usb_init(int index, enum usb_init_type init) > +{ > + return dwc3_uboot_init(&dwc3_device_data); > +} > +#endif > diff --git a/configs/pinebook_pro-rk3399_defconfig > b/configs/pinebook_pro-rk3399_defconfig > new file mode 100644 > index 0000000000..28577256e7 > --- /dev/null > +++ b/configs/pinebook_pro-rk3399_defconfig > @@ -0,0 +1,76 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_ROCKCHIP=y > +CONFIG_SYS_TEXT_BASE=0x00200000 > +CONFIG_ROCKCHIP_RK3399=y > +CONFIG_TARGET_PINEBOOK_PRO_RK3399=y > +CONFIG_SPL_SPI_FLASH_SUPPORT=y > +CONFIG_SPL_SPI_SUPPORT=y > +CONFIG_DEBUG_UART_BASE=0xFF1A0000 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_DEBUG_UART=y > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb" > +CONFIG_MISC_INIT_R=y > +# CONFIG_DISPLAY_CPUINFO is not set > +CONFIG_DISPLAY_BOARDINFO_LATE=y > +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set > +CONFIG_SPL_STACK_R=y > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 > +CONFIG_SPL_MTD_SUPPORT=y > +CONFIG_SPL_ATF=y > +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y > +CONFIG_TPL=y > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_CMD_BOOTZ=y > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_GPT=y > +CONFIG_CMD_I2C=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_SF=y > +CONFIG_CMD_USB=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_CMD_PMIC=y > +CONFIG_CMD_REGULATOR=y > +CONFIG_CMD_MTDPARTS=y > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro" > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names > interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > +CONFIG_ROCKCHIP_GPIO=y > +CONFIG_SYS_I2C_ROCKCHIP=y > +CONFIG_BOOTDELAY=3 > +CONFIG_LED=y > +CONFIG_LED_GPIO=y > +CONFIG_MISC=y > +CONFIG_ROCKCHIP_EFUSE=y > +CONFIG_MMC_DW=y > +CONFIG_MMC_DW_ROCKCHIP=y > +CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_SDMA=y > +CONFIG_MMC_SDHCI_ROCKCHIP=y > +CONFIG_SPI_FLASH=y > +CONFIG_SPI_FLASH_GIGADEVICE=y > +CONFIG_SPI_FLASH_WINBOND=y > +CONFIG_DM_ETH=y > +CONFIG_PMIC_RK8XX=y > +CONFIG_REGULATOR_PWM=y > +CONFIG_REGULATOR_RK8XX=y > +CONFIG_PWM_ROCKCHIP=y > +CONFIG_RAM_RK3399_LPDDR4=y > +CONFIG_BAUDRATE=1500000 > +CONFIG_DEBUG_UART_SHIFT=2 > +CONFIG_ROCKCHIP_SPI=y > +CONFIG_SYSRESET=y > +CONFIG_USB=y > +CONFIG_ROCKCHIP_USB2_PHY=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_XHCI_DWC3=y > +# CONFIG_USB_XHCI_ROCKCHIP is not set > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_HOST_ETHER=y > +CONFIG_USB_ETHER_ASIX=y > +CONFIG_USB_ETHER_ASIX88179=y > +CONFIG_USB_ETHER_MCS7830=y > +CONFIG_USB_ETHER_RTL8152=y > +CONFIG_USB_ETHER_SMSC95XX=y > +CONFIG_SPL_TINY_MEMSET=y > +CONFIG_ERRNO_STR=y > diff --git a/include/configs/pinebook_pro_rk3399.h > b/include/configs/pinebook_pro_rk3399.h > new file mode 100644 > index 0000000000..f383becbf8 > --- /dev/null > +++ b/include/configs/pinebook_pro_rk3399.h > @@ -0,0 +1,29 @@ > +/* > + * Copyright (C) 2016 Rockchip Electronics Co., Ltd > + * Copyright (C) 2019 Peter Robinson <pbrobinson at gmail.com> > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +#ifndef __PINEBOOKPRO_RK3399_H > +#define __PINEBOOKPRO_RK3399_H > + > +#define ROCKCHIP_DEVICE_SETTINGS \ > + "stdin=serial,usbkbd\0" \ > + "stdout=serial,vidconsole\0" \ > + "stderr=serial,vidconsole\0" > + > +#include <configs/rk3399_common.h> > + > +#if defined(CONFIG_ENV_IS_IN_MMC) > +#define CONFIG_SYS_MMC_ENV_DEV 0 > +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) > +#define CONFIG_ENV_SECT_SIZE (8 * 1024) > +#endif > + > +#undef CONFIG_SYS_SPI_U_BOOT_OFFS > +#define CONFIG_SYS_SPI_U_BOOT_OFFS 1024 * 512 > + > +#define SDRAM_BANK_SIZE (2UL << 30) > + > +#endif
signature.asc
Description: PGP signature