Add a driver for the rng device found on stm32mp1 platforms. The
driver provides a routine for reading the random number seed from the
hardware device.

Signed-off-by: Sughosh Ganu <sughosh.g...@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chot...@st.com>
Acked-by: Patrick Delaunay <patrick.delau...@st.com>
---
Changes since V5:
* Handle review comments from Heinrich Schuchardt to read all the
  bytes requested in the individual drivers.

 drivers/rng/Kconfig        |   7 ++
 drivers/rng/Makefile       |   1 +
 drivers/rng/stm32mp1_rng.c | 161 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 169 insertions(+)
 create mode 100644 drivers/rng/stm32mp1_rng.c

diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig
index dd44cc0..c9c4751 100644
--- a/drivers/rng/Kconfig
+++ b/drivers/rng/Kconfig
@@ -5,3 +5,10 @@ config DM_RNG
          Enable driver model for random number generator(rng) devices.
          This interface is used to initialise the rng device and to
          read the random seed from the device.
+
+config RNG_STM32MP1
+       bool "Enable random number generator for STM32MP1"
+       depends on ARCH_STM32MP && DM_RNG
+       default n
+       help
+         Enable STM32MP1 rng driver.
diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile
index 311705b..699beb3 100644
--- a/drivers/rng/Makefile
+++ b/drivers/rng/Makefile
@@ -4,3 +4,4 @@
 #
 
 obj-$(CONFIG_DM_RNG) += rng-uclass.o
+obj-$(CONFIG_RNG_STM32MP1) += stm32mp1_rng.o
diff --git a/drivers/rng/stm32mp1_rng.c b/drivers/rng/stm32mp1_rng.c
new file mode 100644
index 0000000..ec6af7e
--- /dev/null
+++ b/drivers/rng/stm32mp1_rng.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <reset.h>
+#include <rng.h>
+
+#include <asm/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+
+#define RNG_CR 0x00
+#define RNG_CR_RNGEN BIT(2)
+#define RNG_CR_CED BIT(5)
+
+#define RNG_SR 0x04
+#define RNG_SR_SEIS BIT(6)
+#define RNG_SR_CEIS BIT(5)
+#define RNG_SR_SECS BIT(2)
+#define RNG_SR_DRDY BIT(0)
+
+#define RNG_DR 0x08
+
+struct stm32_rng_platdata {
+       fdt_addr_t base;
+       struct clk clk;
+       struct reset_ctl rst;
+};
+
+static int stm32_rng_read(struct udevice *dev, void *data, size_t len)
+{
+       int retval = 0, i;
+       u32 sr, count, reg;
+       size_t increment;
+       struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
+
+       while (len > 0) {
+               retval = readl_poll_timeout(pdata->base + RNG_SR, sr,
+                                           sr & RNG_SR_DRDY, 10000);
+               if (retval)
+                       return retval;
+
+               if (sr & (RNG_SR_SEIS | RNG_SR_SECS)) {
+                       /* As per SoC TRM */
+                       clrbits_le32(pdata->base + RNG_SR, RNG_SR_SEIS);
+                       for (i = 0; i < 12; i++)
+                               readl(pdata->base + RNG_DR);
+                       if (readl(pdata->base + RNG_SR) & RNG_SR_SEIS) {
+                               printf("RNG Noise");
+                               return -EIO;
+                       }
+                       /* start again */
+                       continue;
+               }
+
+               /*
+                * Once the DRDY bit is set, the RNG_DR register can
+                * be read four consecutive times.
+                */
+               count = 4;
+               while (len && count) {
+                       reg = readl(pdata->base + RNG_DR);
+                       memcpy(data, &reg, min(len, sizeof(u32)));
+                       increment = min(len, sizeof(u32));
+                       data += increment;
+                       len -= increment;
+                       count--;
+               }
+       }
+
+       return 0;
+}
+
+static int stm32_rng_init(struct stm32_rng_platdata *pdata)
+{
+       int err;
+
+       err = clk_enable(&pdata->clk);
+       if (err)
+               return err;
+
+       /* Disable CED */
+       writel(RNG_CR_RNGEN | RNG_CR_CED, pdata->base + RNG_CR);
+
+       /* clear error indicators */
+       writel(0, pdata->base + RNG_SR);
+
+       return 0;
+}
+
+static int stm32_rng_cleanup(struct stm32_rng_platdata *pdata)
+{
+
+       writel(0, pdata->base + RNG_CR);
+
+       return clk_disable(&pdata->clk);
+}
+
+static int stm32_rng_probe(struct udevice *dev)
+{
+       struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
+
+       reset_assert(&pdata->rst);
+       udelay(20);
+       reset_deassert(&pdata->rst);
+
+       return stm32_rng_init(pdata);
+}
+
+static int stm32_rng_remove(struct udevice *dev)
+{
+       struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
+
+       return stm32_rng_cleanup(pdata);
+}
+
+static int stm32_rng_ofdata_to_platdata(struct udevice *dev)
+{
+       struct stm32_rng_platdata *pdata = dev_get_platdata(dev);
+       int err;
+
+       pdata->base = dev_read_addr(dev);
+       if (!pdata->base)
+               return -ENOMEM;
+
+       err = clk_get_by_index(dev, 0, &pdata->clk);
+       if (err)
+               return err;
+
+       err = reset_get_by_index(dev, 0, &pdata->rst);
+       if (err)
+               return err;
+
+       return 0;
+}
+
+static const struct dm_rng_ops stm32_rng_ops = {
+       .read = stm32_rng_read,
+};
+
+static const struct udevice_id stm32_rng_match[] = {
+       {
+               .compatible = "st,stm32-rng",
+       },
+       {},
+};
+
+U_BOOT_DRIVER(stm32_rng) = {
+       .name = "stm32-rng",
+       .id = UCLASS_RNG,
+       .of_match = stm32_rng_match,
+       .ops = &stm32_rng_ops,
+       .probe = stm32_rng_probe,
+       .remove = stm32_rng_remove,
+       .platdata_auto_alloc_size = sizeof(struct stm32_rng_platdata),
+       .ofdata_to_platdata = stm32_rng_ofdata_to_platdata,
+};
-- 
2.7.4

Reply via email to