Dear Stefan Roese, In message <201007231026.53803...@denx.de> you wrote: > The following changes since commit 1f82ff4777f360e92aa37bbbed647f7b9d9d2044: > > Merge branch 'master' of git://git.denx.de/u-boot-video (2010-07-17 > 20:49:59 > +0200) > > are available in the git repository at: > > git://www.denx.de/git/u-boot-ppc4xx.git master > > Rupjyoti Sarmah (1): > ppc4xx/Canyonlands added USB board callbacks > > Stefan Roese (8): > ppc4xx: T3CORP fixes and updates > ppc4xx: Add CONFIG_DDR_RFDC_FIXED to allow board specific RFDC values > ppc4xx: Only define DDR2 registers for the correct PowerPC variants > ppc4xx: DDR/ECC: Use correct macros to clear error status > ppc4xx: Add "ecctest" command to test/simulate ECC errors > ppc4xx: Add ECC status info to machine-check exception for IBM DDR2 core > ppc4xx: Enable "ecctest" command on katmai > ppc4xx: Enable "ecctest" command on t3corp > > arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c | 12 + > arch/powerpc/cpu/ppc4xx/Makefile | 3 + > arch/powerpc/cpu/ppc4xx/cmd_ecctest.c | 284 > ++++++++++++++++++++++ > arch/powerpc/cpu/ppc4xx/ecc.c | 21 ++- > arch/powerpc/cpu/ppc4xx/traps.c | 16 ++ > arch/powerpc/include/asm/ppc4xx-sdram.h | 10 +- > board/amcc/canyonlands/canyonlands.c | 64 +++++- > board/t3corp/chip_config.c | 16 ++- > board/t3corp/init.S | 8 +- > board/t3corp/t3corp.c | 2 +- > include/configs/canyonlands.h | 8 + > include/configs/katmai.h | 1 + > include/configs/t3corp.h | 28 +- > 13 files changed, 440 insertions(+), 33 deletions(-) > create mode 100644 arch/powerpc/cpu/ppc4xx/cmd_ecctest.c
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "May the forces of evil become confused on the way to your house." - George Carlin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot