Hi Marek, On Wed, 15 Jan 2020 at 19:36, Marek Szyprowski <m.szyprow...@samsung.com> wrote: > > XOM pins provide information for iROM bootloader about the boot device. > Those pins are mapped to lower bits of OP_MODE register (0x10000008), > which is common for all Exynos SoC variants. Set the default MMC device id > to reflect the boot device selected by XOM[7:5] pins (2 for the SD or 0 for > the eMMC). > > Signed-off-by: Marek Szyprowski <m.szyprow...@samsung.com> > --- > arch/arm/mach-exynos/include/mach/cpu.h | 1 + > board/samsung/common/board.c | 14 ++++++++++++++ > 2 files changed, 15 insertions(+) > > diff --git a/arch/arm/mach-exynos/include/mach/cpu.h > b/arch/arm/mach-exynos/include/mach/cpu.h > index 766edeeb29..fb5fdaf3ba 100644 > --- a/arch/arm/mach-exynos/include/mach/cpu.h > +++ b/arch/arm/mach-exynos/include/mach/cpu.h > @@ -17,6 +17,7 @@ > > #define EXYNOS4_GPIO_PART3_BASE 0x03860000 > #define EXYNOS4_PRO_ID 0x10000000 > +#define EXYNOS4_OP_MODE 0x10000008 > #define EXYNOS4_SYSREG_BASE 0x10010000 > #define EXYNOS4_POWER_BASE 0x10020000 > #define EXYNOS4_SWRESET 0x10020400 > diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c > index ee2fc7971e..ac91c0a6fb 100644 > --- a/board/samsung/common/board.c > +++ b/board/samsung/common/board.c > @@ -359,3 +359,17 @@ int board_usb_cleanup(int index, enum usb_init_type init) > #endif > return 0; > } > + > +/** > + * mmc_get_env_dev() - read boot MMC device id from XOM[7:5] pins. > + */ > +int mmc_get_env_dev(void) > +{ > + u32 mode = readl(EXYNOS4_OP_MODE) & 0x1C; > + > + if (mode == 0x04) > + return 2; /* MMC2: SD */ > + > + /* MMC0: eMMC or unknown */ > + return 0; > +} > -- > 2.17.1 > If you could add some debug prints which boot mode got selected, It will be much help. Please add my
Reviewed-by: Anand Moon <linux.am...@gmail.com> -Anand