From: Robert Beckett <bob.beck...@collabora.com> Remove legacy iomux setup for fec. Enable phylib and DM fec. Use Kconfig for enabling fec.
Signed-off-by: Robert Beckett <bob.beck...@collabora.com> --- board/ge/mx53ppd/mx53ppd.c | 26 -------------------------- configs/mx53ppd_defconfig | 3 +++ include/configs/mx53ppd.h | 8 -------- 3 files changed, 3 insertions(+), 34 deletions(-) diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c index 044fd80..bdf0691 100644 --- a/board/ge/mx53ppd/mx53ppd.c +++ b/board/ge/mx53ppd/mx53ppd.c @@ -98,31 +98,6 @@ int board_ehci_hcd_init(int port) } #endif -static void setup_iomux_fec(void) -{ - static const iomux_v3_cfg_t fec_pads[] = { - NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | - PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | - PAD_CTL_ODE), - NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, - PAD_CTL_HYS | PAD_CTL_PKE), - }; - - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); -} - static int clock_1GHz(void) { int ret; @@ -160,7 +135,6 @@ void ppd_gpio_init(void) int board_early_init_f(void) { - setup_iomux_fec(); ppd_gpio_init(); return 0; diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index 2f29c3e..3a208f4 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -49,6 +49,9 @@ CONFIG_I2C_EEPROM=y CONFIG_DM_MMC=y CONFIG_FSL_ESDHC_IMX=y CONFIG_MTD=y +CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX5=y diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index 8fa7d15..97d566d 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -28,12 +28,6 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -/* Eth Configs */ - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1F - /* USB Configs */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX @@ -49,8 +43,6 @@ /* Command definition */ -#define CONFIG_ETHPRIME "FEC0" - #define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */ #define PPD_CONFIG_NFS \ -- 2.10.1