Taken from the linux-next commit:
98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next
Drop the /omit-if-no-ref/ keyword as it's not supported by u-boot.
Signed-off-by: Andre Heider <a.hei...@gmail.com>
Acked-by: Maxime Ripard <mrip...@kernel.org>
---
arch/arm/dts/sun50i-h6-beelink-gs1.dts | 48 +++-
arch/arm/dts/sun50i-h6-orangepi-lite2.dts | 6 +-
arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 8 +-
arch/arm/dts/sun50i-h6-orangepi.dtsi | 18 +-
arch/arm/dts/sun50i-h6-pine-h64.dts | 33 ++-
arch/arm/dts/sun50i-h6.dtsi | 262 +++++++++++++++++--
6 files changed, 328 insertions(+), 47 deletions(-)
diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
index 0dc33c90dd..df6d872c34 100644
--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2019 Clément Péron <peron.c...@gmail.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Clément Péron <peron.c...@gmail.com>
/dts-v1/;
@@ -25,6 +23,7 @@
connector {
compatible = "hdmi-connector";
type = "a";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
port {
hdmi_con_in: endpoint {
@@ -51,12 +50,34 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ sound-spdif {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sun50i-h6-spdif";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
};
&de {
status = "okay";
};
+&dwc3 {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -70,6 +91,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
@@ -206,6 +232,7 @@
};
reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-gpu";
@@ -232,6 +259,11 @@
};
};
+&r_ir {
+ linux,rc-map-name = "rc-beelink-gs1";
+ status = "okay";
+};
+
&r_pio {
/*
* PL0 and PL1 are used for PMIC I2C
@@ -243,6 +275,10 @@
vcc-pm-supply = <®_aldo1>;
};
+&spdif {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
@@ -258,3 +294,7 @@
usb0_vbus-supply = <®_vcc5v>;
status = "okay";
};
+
+&usb3phy {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
index e098a2475f..e7ca75c0d0 100644
--- a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Jagan Teki <ja...@openedev.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Jagan Teki <ja...@openedev.com>
#include "sun50i-h6-orangepi.dtsi"
diff --git a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
index 12e17567ab..83aab73688 100644
--- a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
+++ b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
@@ -1,8 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <ja...@amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <ja...@amarulasolutions.com>
#include "sun50i-h6-orangepi.dtsi"
diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi
b/arch/arm/dts/sun50i-h6-orangepi.dtsi
index 62e27948a3..37f4c57597 100644
--- a/arch/arm/dts/sun50i-h6-orangepi.dtsi
+++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi
@@ -1,8 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <ja...@amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <ja...@amarulasolutions.com>
/dts-v1/;
@@ -55,6 +53,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
&mmc0 {
vmmc-supply = <®_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
@@ -163,6 +166,7 @@
};
reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-gpu";
@@ -189,6 +193,10 @@
};
};
+&r_ir {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts
b/arch/arm/dts/sun50i-h6-pine-h64.dts
index 1898345183..d1c2aa5b3a 100644
--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (c) 2017 Icenowy Zheng <icen...@aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icen...@aosc.io>
/dts-v1/;
@@ -10,7 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Pine H64";
+ model = "Pine H64 model A";
compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
aliases {
@@ -22,9 +20,10 @@
stdout-path = "serial0:115200n8";
};
- connector {
+ hdmi_connector: connector {
compatible = "hdmi-connector";
type = "a";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
port {
hdmi_con_in: endpoint {
@@ -52,6 +51,16 @@
};
};
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usb_vbus: vbus {
compatible = "regulator-fixed";
regulator-name = "usb-vbus";
@@ -68,7 +77,7 @@
pinctrl-0 = <&ext_rgmii_pins>;
phy-mode = "rgmii";
phy-handle = <&ext_rgmii_phy>;
- phy-supply = <®_aldo2>;
+ phy-supply = <®_gmac_3v3>;
allwinner,rx-delay-ps = <200>;
allwinner,tx-delay-ps = <200>;
status = "okay";
@@ -85,6 +94,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
&hdmi {
status = "okay";
};
@@ -221,6 +235,7 @@
};
reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-name = "vdd-gpu";
@@ -255,6 +270,10 @@
};
};
+&r_ir {
+ status = "okay";
+};
+
&r_pio {
vcc-pm-supply = <®_aldo1>;
};
diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
index a117f479ae..148bf0107b 100644
--- a/arch/arm/dts/sun50i-h6.dtsi
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2017 Icenowy Zheng <icen...@aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icen...@aosc.io>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-h6-ccu.h>
@@ -11,6 +9,7 @@
#include <dt-bindings/reset/sun50i-h6-ccu.h>
#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -56,14 +55,6 @@
status = "disabled";
};
- iosc: internal-osc-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <16000000>;
- clock-accuracy = <300000000>;
- clock-output-names = "iosc";
- };
-
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -71,11 +62,21 @@
clock-output-names = "osc24M";
};
- osc32k: osc32k_clk {
+ ext_osc32k: ext_osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
- clock-output-names = "osc32k";
+ clock-output-names = "ext_osc32k";
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu",
+ "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
@@ -157,6 +158,29 @@
allwinner,sram = <&ve_sram 1>;
};
+ gpu: gpu@1800000 {
+ compatible = "allwinner,sun50i-h6-mali",
+ "arm,mali-t720";
+ reg = <0x01800000 0x4000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+ clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+ clock-names = "core", "bus";
+ resets = <&ccu RST_BUS_GPU>;
+ status = "disabled";
+ };
+
+ crypto: crypto@1904000 {
+ compatible = "allwinner,sun50i-h6-crypto";
+ reg = <0x01904000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu
CLK_MBUS_CE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_CE>;
+ };
+
syscon: syscon@3000000 {
compatible = "allwinner,sun50i-h6-system-control",
"allwinner,sun50i-a64-system-control";
@@ -197,7 +221,7 @@
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h6-ccu";
reg = <0x03001000 0x1000>;
- clocks = <&osc24M>, <&osc32k>, <&iosc>;
+ clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
clock-names = "hosc", "losc", "iosc";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -215,9 +239,15 @@
#dma-cells = <1>;
};
- sid: sid@3006000 {
+ sid: efuse@3006000 {
compatible = "allwinner,sun50i-h6-sid";
reg = <0x03006000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@14 {
+ reg = <0x14 0x8>;
+ };
};
watchdog: watchdog@30090a0 {
@@ -225,10 +255,21 @@
"allwinner,sun6i-a31-wdt";
reg = <0x030090a0 0x20>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
/* Broken on some H6 boards */
status = "disabled";
};
+ pwm: pwm@300a000 {
+ compatible = "allwinner,sun50i-h6-pwm";
+ reg = <0x0300a000 0x400>;
+ clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+ clock-names = "mod", "bus";
+ resets = <&ccu RST_BUS_PWM>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
@@ -236,7 +277,7 @@
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
@@ -256,6 +297,21 @@
function = "hdmi";
};
+ i2c0_pins: i2c0-pins {
+ pins = "PD25", "PD26";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1-pins {
+ pins = "PH5", "PH6";
+ function = "i2c1";
+ };
+
+ i2c2_pins: i2c2-pins {
+ pins = "PD23", "PD24";
+ function = "i2c2";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
@@ -285,10 +341,25 @@
bias-pull-up;
};
+ spdif_tx_pin: spdif-tx-pin {
+ pins = "PH7";
+ function = "spdif";
+ };
+
uart0_ph_pins: uart0-ph-pins {
pins = "PH0", "PH1";
function = "uart0";
};
+
+ uart1_pins: uart1-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
+
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
+ pins = "PG8", "PG9";
+ function = "uart1";
+ };
};
gic: interrupt-controller@3021000 {
@@ -394,6 +465,48 @@
status = "disabled";
};
+ i2c0: i2c@5002000 {
+ compatible = "allwinner,sun50i-h6-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002000 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@5002400 {
+ compatible = "allwinner,sun50i-h6-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002400 0x400>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@5002800 {
+ compatible = "allwinner,sun50i-h6-i2c",
+ "allwinner,sun6i-a31-i2c";
+ reg = <0x05002800 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
emac: ethernet@5020000 {
compatible = "allwinner,sun50i-h6-emac",
"allwinner,sun50i-a64-emac";
@@ -414,6 +527,21 @@
};
};
+ spdif: spdif@5093000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun50i-h6-spdif";
+ reg = <0x05093000 0x400>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+ clock-names = "apb", "spdif";
+ resets = <&ccu RST_BUS_SPDIF>;
+ dmas = <&dma 2>;
+ dma-names = "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_tx_pin>;
+ status = "disabled";
+ };
+
usb2otg: usb@5100000 {
compatible = "allwinner,sun50i-h6-musb",
"allwinner,sun8i-a33-musb";
@@ -470,6 +598,38 @@
status = "disabled";
};
+ dwc3: dwc3@5200000 {
+ compatible = "snps,dwc3";
+ reg = <0x05200000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_XHCI>,
+ <&ccu CLK_BUS_XHCI>,
+ <&rtc 0>;
+ clock-names = "ref", "bus_early", "suspend";
+ resets = <&ccu RST_BUS_XHCI>;
+ /*
+ * The datasheet of the chip doesn't declare the
+ * peripheral function, and there's no boards known
+ * to have a USB Type-B port routed to the port.
+ * In addition, no one has tested the peripheral
+ * function yet.
+ * So set the dr_mode to "host" in the DTSI file.
+ */
+ dr_mode = "host";
+ phys = <&usb3phy>;
+ phy-names = "usb3-phy";
+ status = "disabled";
+ };
+
+ usb3phy: phy@5210000 {
+ compatible = "allwinner,sun50i-h6-usb3-phy";
+ reg = <0x5210000 0x10000>;
+ clocks = <&ccu CLK_USB_PHY1>;
+ resets = <&ccu RST_USB_PHY1>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
ehci3: usb@5311000 {
compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
reg = <0x05311000 0x100>;
@@ -480,6 +640,7 @@
resets = <&ccu RST_BUS_OHCI3>,
<&ccu RST_BUS_EHCI3>;
phys = <&usb2phy 3>;
+ phy-names = "usb";
status = "disabled";
};
@@ -491,6 +652,7 @@
<&ccu CLK_USB_OHCI3>;
resets = <&ccu RST_BUS_OHCI3>;
phys = <&usb2phy 3>;
+ phy-names = "usb";
status = "disabled";
};
@@ -507,7 +669,7 @@
resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
reset-names = "ctrl", "hdcp";
phys = <&hdmi_phy>;
- phy-names = "hdmi-phy";
+ phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
status = "disabled";
@@ -549,7 +711,6 @@
"tcon-tv0";
clock-output-names = "tcon-top-tv0";
resets = <&ccu RST_BUS_TCON_TOP>;
- reset-names = "rst";
#clock-cells = <1>;
ports {
@@ -636,10 +797,20 @@
};
};
+ rtc: rtc@7000000 {
+ compatible = "allwinner,sun50i-h6-rtc";
+ reg = <0x07000000 0x400>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clock-output-names = "osc32k", "osc32k-out", "iosc";
+ clocks = <&ext_osc32k>;
+ #clock-cells = <1>;
+ };
+
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-h6-r-ccu";
reg = <0x07010000 0x400>;
- clocks = <&osc24M>, <&osc32k>, <&iosc>,
+ clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
@@ -651,6 +822,7 @@
"allwinner,sun6i-a31-wdt";
reg = <0x07020400 0x20>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
};
r_intc: interrupt-controller@7021000 {
@@ -667,7 +839,7 @@
reg = <0x07022000 0x400>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>;
+ clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
@@ -678,10 +850,30 @@
pins = "PL0", "PL1";
function = "s_i2c";
};
+
+ r_ir_rx_pin: r-ir-rx-pin {
+ pins = "PL9";
+ function = "s_cir_rx";
+ };
+ };
+
+ r_ir: ir@7040000 {
+ compatible = "allwinner,sun50i-h6-ir",
+ "allwinner,sun6i-a31-ir";
+ reg = <0x07040000 0x400>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB1_IR>,
+ <&r_ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu RST_R_APB1_IR>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
};
r_i2c: i2c@7081400 {
- compatible = "allwinner,sun6i-a31-i2c";
+ compatible = "allwinner,sun50i-h6-i2c",
+ "allwinner,sun6i-a31-i2c";
reg = <0x07081400 0x400>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB2_I2C>;
@@ -692,5 +884,31 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ ths: thermal-sensor@5070400 {
+ compatible = "allwinner,sun50i-h6-ths";
+ reg = <0x05070400 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_THS>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
};
};
--
2.24.1
