> The 'enable-active-high' DTS property configures GPIO so it is active with > HIGH state (by default it is low). > The 'regulator-boot-on' property indicates that the regulator was enabled > in the 'earlier' stage - i.e. bootloader/firmware. > In the XEA case the 'fec-3v3' was configured (as a "wrapper" on GPIO0_0) in > very early SPL code, so it shouldn't be modified at latter stages. > Signed-off-by: Lukasz Majewski <lu...@denx.de> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================