Dear Alexander Stein,

In message 
<1280145784-18909-1-git-send-email-alexander.st...@systec-electronic.com> you 
wrote:
> On AT91 the watchdog mode register can only be written once after reset.
> If this register is written by u-boot e.g. a Linux driver can't
> reconfigure the watchdog later. If the watchdog is left untouched this
> is possible. Without touching the mode register the watchdog has a default
> setup and u-boot is still able to trigger the watchdog.
> 
> Signed-off-by: Alexander Stein <alexander.st...@systec-electronic.com>
> ---
> Changes in v2:
> * Add a new specific option CONFIG_SKIP_WATCHDOG_INIT
> * Add some documentation
> 
> Changes in v3:
> * Be more verbose in describing the problem in the commit message and README
> 
>  README                                      |   11 +++++++++++
>  arch/arm/cpu/arm926ejs/at91/lowlevel_init.S |    2 ++
>  2 files changed, 13 insertions(+), 0 deletions(-)
> 
> diff --git a/README b/README
> index a9c98f2..110668d 100644
> --- a/README
> +++ b/README
> @@ -2817,6 +2817,17 @@ Low Level (hardware related) configuration options:
>               some other boot loader or by a debugger which
>               performs these initializations itself.
>  
> +- CONFIG_SKIP_WATCHDOG_INIT
> +
> +             [arm AT91 only] If this variable is defined, then the
> +             watchdog will not be programmed upon u-boot start.
> +             On AT91 the watchdog mode register can only be written
> +             once after reset. If this register is written by u-boot
> +             e.g. a Linux driver can't reconfigure the watchdog later. If
> +             the watchdog is left untouched this is possible.
> +             Without touching the mode register the watchdog has a default
> +             setup and u-boot is still able to trigger the watchdog.

I think the Subject: is wrong. It reads:

        Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is
        undefined

I think you mean "if CONFIG_SKIP_WATCHDOG_INIT is _DEFINED_" ?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
You've no idea of what a poor opinion  I  have  of  myself,  and  how
little I deserve it.                                  - W. S. Gilbert
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to