Forgot to mention that this patchset needs this patch before:
https://patchwork.ozlabs.org/patch/1232248/

--
Giulio Benetti
Benetti Engineering sas

On 2/26/20 6:15 PM, Giulio Benetti wrote:
This patchset add support for LCDIF on i.MXRT1050 evk. This requires
PLL5 to be setup, mxsfb needs to use display_timing to retrieve if Lcd
has inverted PIXCLOCK from dts.

With this patchset applied we temporary loose DCache support until it will
get implemented, since a function in mxsfb.c is needed for setting cache
behaviour. Anyway this way Lcd will show the console same way as serial
does.

Also I've moved private sunxi_ctfb_mode_to_display_timing() to videomodes
since I need it for mxfsb.c too, then having a unified function to convert
from ctfb_mode to display_timing.

Giulio Benetti (18):
   clk: imx: pllv3: add enable_bit
   clk: imx: imxrt1050-clk: fix typo in clock name "video:"
   clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL
   videomodes: add helper function to convert from ctfb to display_timing
   sunxi: display: use common video_ctfb_mode_to_display_timing()
   video: mxsfb: add support for DM CLK
   video: mxsfb: add support for i.MXRT
   video: mxsfb: refactor for using display_timings
   video: mxsfb: enable setting HSYNC negative polarity
   video: mxsfb: enable setting VSYNC negative polarity
   video: mxsfb: enable setting PIXDATA on negative edge
   video: mxsfb: enable setting ENABLE negative polarity
   imxrt1050_evk: add 16bpp video support if video layer enabled
   ARM: dts: i.mxrt1050: add lcdif node
   ARM: dts: imxrt1050: allow this dtsi file to be compiled in Linux
   arch: arm: dts: imxrt1050-evk: add lcdif node
   configs: imxrt1050-evk: enable video support/console
   configs: imxrt1050-evk: temporary disable DCACHE

  arch/arm/dts/imxrt1050-evk.dts             | 57 +++++++++++++
  arch/arm/dts/imxrt1050.dtsi                | 14 +++-
  arch/arm/include/asm/arch-imxrt/imx-regs.h |  6 ++
  arch/arm/include/asm/mach-imx/regs-lcdif.h |  6 +-
  configs/imxrt1050-evk_defconfig            |  6 ++
  drivers/clk/imx/clk-imxrt1050.c            | 15 +++-
  drivers/clk/imx/clk-pllv3.c                |  9 +++
  drivers/video/mxsfb.c                      | 94 ++++++++++++++--------
  drivers/video/sunxi/sunxi_display.c        | 33 +-------
  drivers/video/videomodes.c                 | 29 +++++++
  drivers/video/videomodes.h                 |  3 +
  include/configs/imxrt1050-evk.h            | 15 ++++
  12 files changed, 216 insertions(+), 71 deletions(-)


Reply via email to