On 16/03/20 12:19 pm, Lokesh Vutla wrote:
> Add all TI specific drivers, include, arch files under ARM TI entry.
> Driver files are added only if there is no entry for the specific
> subsystem in MAINTAINERS file.
>
> Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
> ---
> MAINTAINERS | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 92dda40a85..4b86fea782 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -423,8 +423,32 @@ T: git
> https://gitlab.denx.de/u-boot/custodians/u-boot-ti.git
> F: arch/arm/mach-davinci/
> F: arch/arm/mach-k3/
> F: arch/arm/mach-keystone/
> +F: arch/arm/mach-omap2/
> F: arch/arm/include/asm/arch-omap*/
> F: arch/arm/include/asm/ti-common/
> +F: board/ti/
Could you add drivers/dma/ti/
> +F: drivers/firmware/ti_sci.*
> +F: drivers/gpio/omap_gpio.c
> +F: drivers/memory/ti-aemif.c
> +F: drivers/misc/k3_avs.c
> +F: drivers/mailbox/k3-sec-procy.c
> +F: drivers/pci/pcie_dw_ti.c
> +F: drivers/phy/keystone-usb-phy.c
> +F: drivers/phy/omap-usb2-phy.c
> +F: drivers/phy/phy-ti-am654.c
> +F: drivers/phy/ti-pipe3-phy.c
> +F: drivers/ram/k3*
> +F: drivers/remoteproc/k3_system_controller.c
> +F: drivers/remoteproc/ti*
> +F: drivers/reset/reset-ti-sci.c
> +F: drivers/rtc/davinci.c
> +F: drivers/serial/serial_omap.c
> +F: drivers/soc/ti/
> +F: drivers/sysreset/sysreset-ti-sci.c
> +F: drivers/thermal/ti-bandgap.c
> +F: drivers/timer/omap-timer.c
> +F: drivers/watchdog/omap_wdt.c
> +F: include/linux/soc/ti/
>
> ARM U8500
> M: Stephan Gerhold <step...@gerhold.net>
>
--
Regards
Vignesh
